Kirk from Grizzly Industrial provides a detailed walkthrough of the G0774 automatic edge bander and the G0854 model. He begins by explaining the various components and stations of the edge bander, starting with the carousel where edge banding tape is placed. Kirk then covers the control panel, panel feeder, table, infeed fence, glue spindle assembly, end trimmer, flush trimmers, and buffing wheels.
He demonstrates how the edge banding tape is applied to the board as it passes through the machine, including preheating the edge of the board, applying glue, trimming the excess tape, and buffing the edges. Kirk also discusses the electrical and pneumatic components of the edge bander, including the termination strip, transformer, PLC, overloads, contactors, and pneumatic solenoids.
Additionally, he highlights the importance of understanding the machine's manual for operation and maintenance purposes and emphasizes the significance of keeping the machine clean for optimal performance.
Throughout the walkthrough, Kirk provides valuable insights into the operation and maintenance of the edge bander, making it easier for users to set up and maintain their equipment effectively.
The G0854 is a scaled-down version of the G0774 automatic edge bander. Kirk walks through its components, starting with the carousel where edge banding tape is placed. He explains the control panel, panel feeder, and various switches and buttons. Kirk demonstrates how the board moves through the machine, making contact with rollers and switches that activate different functions like applying glue, trimming the tape, and buffing the edges.
He then discusses the electrical and pneumatic components of the machine, including the electrical termination board, fuses, contactors, and air supply regulator. Kirk also highlights safety features like intrinsic safety switches that shut down the system when necessary.
Moving to the front of the machine, Kirk explains the electrical junction box, air supply regulator, and electrical shut-off switch. He covers the pneumatic and electrical components located in the central part of the cabinet.
Finally, Kirk walks through the back of the G0854, discussing the carousel, in-feed fence, pressure rollers, glue spindle assembly, end trimmer, flush trimmers, and panel feeder. He emphasizes the importance of dust collection for optimal machine operation.
We trust you will find this video to be beneficial. Please feel free to reach out to us HERE if you have any questions on your edge bander.