Can I use this with my Grizzly benchtop table saw?
No, the T33988 Crosscut Sled is not compatible with benchtop table saws. It is designed for cabinet-style table saws with specific miter slot dimensions.
How thick is the base?
The sled’s base is 12 mm thick and made from laminated MDF for durability.
What is the miter slot guide made of?
The miter slot guide (miter bar) is made of green anodized aluminum.
Can you use this with a jobsite saw?
No, this sled is intended for cabinet-style table saws only. For details on table saw requirements, refer to the specifications below.
Will this fit on a Laguna F1 saw?
We do not have specifications for other manufacturers’ machines. Please contact Laguna directly for compatibility information.
Will this fit an older Craftsman table saw?
This sled requires:
- Miter slot dimensions: 3/4" W x 3/8" D
- Minimum distance from blade arbor to rear table edge: 4-1/4"
If your saw meets these requirements, it should work.
Can this be used on the right side of the blade for saws that bevel to the left?
No, the sled is designed for use in the left miter slot only.
How do you ensure the fence is precisely 90° to the blade?
Use a 90° square to check alignment. The fence stop cap screws allow fine adjustments to ensure the fence is square to the blade.
Does it fit a DeWalt contractor table saw (DW7485)?
We do not have specifications for DeWalt saws. Please contact DeWalt for compatibility details.
Can I use this with a SawStop contractor saw?
No, this sled fits 5/16" T-slots, while SawStop saws typically have 3/4" T-slots, so it will not fit.
Is the miter bar compatible with a Shopsmith miter slot?
We cannot confirm compatibility with Shopsmith products. This sled is designed for 3/4" W x 3/8" D miter slots.
Will this fit a benchtop table saw?
No, the T33988 Crosscut Sled requires a cabinet-style table saw with the correct miter slot dimensions.
What are the table saw requirements for this sled?
- Miter slot size: 3/4" W x 3/8" D
- Minimum blade-to-miter slot distance: 4-1/4"
- Table saw type: Cabinet-style table saw
What are the overall dimensions and weight?
- Dimensions: 27-3/8" W x 24" D x 5-3/4" H
- Weight: 11 lbs.
What is the range of miter angles?
The sled supports 0° to 47.5° miter angles.
What is the fence size?
- Length: 24-3/8"
- Width: 1/2"
- Height: 2-9/16"
- T-slot size: 5/16"
What materials is it made from?
- Sled base: Laminated MDF
- Fence: Aluminum
- Fence face: Laminated MDF
- Miter bar: Aluminum
What safety and performance features does it include?
- Hold-down clamp for securing workpieces
- Chip breaker to reduce tear-out
- 90° miter stop for quick setup
- Flip stop for repeatable cuts
- Hairline indicator for precise measurements
- Melamine-coated MDF for durability
What is this sled best used for?
Ideal for:
- Crosscuts, miters, and compound angles
- Cabinet making, toy making, and precision woodworking
- Cutting small or wide workpieces safely