- Gather materials: Assemble the necessary wood pieces for your project.
- Set up machine: Follow the manual to adjust the fence for your wood thickness and install the flip stops.
- Plan layout: Determine the placement of pocket holes based on your project design.
- Mark pieces: Use a pencil to mark the placement of pocket holes on the wood pieces.
- Clamp pieces: Secure the wood piece firmly in the machine's clamp.
- Engage machine: Pull the long offset handle forward to start the drilling process.
- Drill holes: The machine will automatically drill the pocket hole to the correct depth.
- Release machine: Return the handle to the back position to stop the machine.
- Apply glue: Optionally apply wood glue to the joint for added strength.
- Assemble pieces: Align the wood pieces and insert pocket hole screws.
- Tighten screws: Drive the screws into place to secure the joint.
- Create plugs: If desired, make or purchase wood plugs to cover the pocket holes.
- Install plugs: Insert the plugs into the pocket holes for a finished look.
- Refer to the instruction manual for detailed guidance.
- Wear appropriate safety gear while operating the machine.
- Experiment with different projects to explore the versatility of pocket hole joinery.
In this video, Kent demonstrates the assembly and versatility of the SHOP Fox W1833 pocket hole machine. You can follow along using the steps above.
We trust you will find this video to be beneficial. Please feel free to reach out to us HERE if you have any questions on how to use the pocket hole machine.