In this how-to video, viewers are guided through the assembly process of the Shop Fox Parallelogram Jointer, with emphasis on safety and proper setup.
Main Points:
-
Assembly Overview: The video walks through each step of assembling the Shop Fox Parallelogram Jointer, providing a clear and detailed guide. It aligns with the instructions provided in the machine's manual.
-
Safety First: Emphasis is placed on the importance of wearing personal protective equipment (PPE) during both the assembly and operation of the jointer, ensuring a safe setup process.
-
Dust Collector Setup: The video concludes by advising viewers to seek assistance from Technical Support if they face any challenges when setting up the dust collector, ensuring proper installation.
This instructional guide makes the assembly process straightforward and emphasizes both safety and support resources for users, helping them get their jointer up and running smoothly.
Please follow the steps below if you'd like to follow along:
1. Unpacking and Inspection
-
Carefully unpack the jointer and all its components.
-
Inspect each part for any damage during shipping.
-
Verify that all listed parts in the manual are present.
2. Cleaning Protective Coatings
-
Remove any rust-preventative coatings from metal surfaces using a suitable solvent.
-
Wipe all parts clean with a soft cloth.
3. Assembling the Stand
-
Attach the stand panels together as per the assembly diagram.
-
Ensure all bolts are tightened securely.
4. Mounting the Jointer to the Stand
-
With assistance, lift the jointer onto the assembled stand.
-
Align the mounting holes and secure the jointer using the provided hardware.
5. Installing the Fence Assembly
-
Attach the fence to the jointer table using the fence brackets.
-
Ensure the fence is square to the table and adjust as necessary.
6. Connecting the Dust Collection System
-
Attach the dust port to the designated outlet on the jointer.
-
Connect your dust collection hose to the port, ensuring a snug fit.
7. Electrical Setup
-
Ensure the power switch is in the "OFF" position.
-
Plug the jointer into a properly grounded outlet that matches the machine's voltage requirements.
8. Adjusting the Infeed Table Height
-
Loosen the infeed table lock.
-
Use the adjustment lever to raise or lower the infeed table to the desired depth of cut.
-
If lowering below 1/8", pull the table release knob while adjusting.
-
Tighten the infeed table lock to secure the setting.
9. Final Checks
-
Ensure all components are securely fastened.
-
Verify that the cutterhead guard moves freely and returns to position.
-
Check that the fence is square and the tables are aligned.
10. Test Run
-
Wear appropriate safety gear: safety glasses, hearing protection, and a respirator.
-
Turn on the jointer and listen for any unusual noises.
-
Feed a test piece of wood to ensure smooth operation.
For detailed diagrams and further instructions, please refer to the official manual HERE.
We trust you will find this video to be beneficial. Please feel to reach out to us HERE if you have any questions about our jointers or need additional support.