This video demonstrates the step-by-step process of replacing sandpaper on the G0459 and G0459P Drum Sanders.
We've also included step-by-step instructions below so you can follow along.
Installing Sandpaper on a G0459/G0459P Drum Sander
Preparation
- Disconnect power: Unplug the sander from the power source.
- Gather tools: Assemble the replacement sandpaper roll, utility knife, and 3/4 inch reinforced tape.
Accessing the Drum
- Open cover: Lift the top cover of the sander to expose the sanding drum.
Removing Old Sandpaper
- Unwind sandpaper: Carefully unwind the old sandpaper from the drum, noting the wrapping direction.
Cutting New Sandpaper
- Use old sandpaper as template: Use the old sandpaper as a pattern or follow the manual's instructions to cut the new sandpaper to size.
- Ensure straight cut: Use a straightedge for a precise cut.
Installing New Sandpaper
- Wrap sandpaper: Start at the right edge of the drum and wrap the new sandpaper tightly around the drum.
- Minimize gaps: Keep the gaps between sandpaper wraps as small as possible.
- Secure with tape: Apply two layers of 3/4 inch reinforced tape to both ends of the sandpaper, ensuring the second layer covers the first.
Note: Always prioritize safety and follow the specific instructions provided in your owner's manual.
We trust you will find this video to be beneficial. Please feel free to reach out to us HERE if you have any questions on how to replace sandpaper on your drum sander.