This video details the process of replacing sandpaper on the G1066Z Drum Sander.
We've also included step-by-step instructions below so you can follow along.
Replacing Sandpaper on G1066Z Drum Sander
Safety First
Note: Always prioritize safety and follow the specific instructions provided in your owner's manual.
Preparation
- Disconnect power: Unplug the sander from the power source.
- Gather materials: Prepare replacement sandpaper rolls, a utility knife, 3/4 inch reinforced tape, and a straightedge.
Removing Old Sandpaper
- Open cover: Lift the top cover to expose the sanding drums.
- Remove tape: Cut the tape securing the sandpaper on the left side of the drum.
- Unwind sandpaper: Carefully unwind the old sandpaper, noting the wrapping direction.
Cutting New Sandpaper
- Measure and cut: Use the old sandpaper as a template or refer to the manual to cut the new sandpaper to size. Ensure a straight cut using a straightedge.
Installing New Sandpaper
- Wrap sandpaper: Starting at the right drum edge, tightly wrap the new sandpaper around the drum.
- Secure with tape: Apply two layers of reinforced tape to both ends of the sandpaper.
- Repeat for second drum: If necessary, repeat steps 4-8 for the other drum.
Final Step
- Close cover: Close the top cover and reconnect the sander to power.
We trust you will find this video to be beneficial. Please feel free to reach out to us HERE if you have any questions on how to install your router extension table.