Turning Your Drill Press into a Spindle Sander using the G2500/G2501 sanding drum set
This includes sanding drums in various sizes and grits.
Prepare Your Drill Press
- Safety first: Ensure your drill press is unplugged.
- Clean the chuck: Clean the drill press chuck to prevent slipping.
Install Sanding Drum
- Select drum size: Choose the appropriate drum size for your project.
- Attach drum to chuck: Securely tighten the sanding drum into the drill press chuck.
Choose Sanding Sleeve
- Select grit: Select the desired grit sanding sleeve based on your project requirements.
- Attach sanding sleeve: Slide the sanding sleeve onto the mounted sanding drum.
Adjust Drill Press Speed
- Set appropriate speed: Choose a suitable speed for the sanding task. Refer to your drill press manual for recommended speeds.
Begin Sanding
- Start sanding: Carefully start sanding your workpiece, maintaining control of the drill press and sanding drum.
Safety Precautions
- Always wear safety glasses and a dust mask when sanding.
- Maintain a firm grip on the drill press and workpiece to prevent accidents.
- Avoid excessive pressure to prevent damage to the sanding drum or workpiece.
Note: For optimal results, experiment with different drum sizes, grit levels, and drill press speeds to achieve the desired finish.
Additional Tip: Consider using a sanding drum attachment for added stability and control during the sanding process.
You can also follow along with the video below.
We trust you will find this video to be beneficial. Please feel free to reach out to us HERE if you have any questions on how to drill press into a spindle sander.