Replacing Shaper Spindles on G1035 and G1026 Shapers
Safety First
- Always disconnect the shaper from the power source before making any adjustments.
Disassembly
- Access the spindle: Loosen the overhead guard and remove the rear cover of the shaper.
- Remove the spindle: Loosen the drawbar nut and lift the spindle out of the shaper. If necessary, gently tap the drawbar to release it.
- Separate drawbar and spindle: Unscrew the drawbar from the spindle.
Installing New Spindle
- Prepare new spindle: Thread the drawbar into the new spindle.
- Insert spindle: Slide the drawbar and spindle assembly into the spindle cartridge, ensuring proper alignment of the notch and pin.
- Secure spindle: Tighten the drawbar nut securely, but avoid overtightening.
Reassembly
- Replace rear cover: Reinstall the rear cover of the shaper.
- Secure overhead guard: Tighten the overhead guard.
Final Step
- Test operation: Before using the shaper, ensure the spindle is securely installed and the overhead guard is in place.
Note: Always refer to your specific shaper's manual for detailed instructions and safety precautions.
In this how-to video, we'll walk you through the process of changing the spindle on the G1035 and G1026 Shaper models using the steps from above.
We trust you will find this video to be beneficial. Please feel free to reach out to us HERE if you have any questions on how to replace a spindle on a shaper.