We've also included the step by step instructions below so you can follow along.
- Unplug the Machine from Power
- Remove the Cutter Head Guard - Head to the front of the machine and remove the cutter head guard.
- Remove the Fence Assembly:
- Unlock the lock lever.
- Move the fence forward. This allows the cutter head guard (connected to the fence) to clear.
- Set the fence assembly aside.
- Lift the Joiner Tables:
- Unlock the table lock levers.
- Lift each table upward until you hear the lock pin set in place.
- Pivot the Dust Port - Pivot the dust port from the joiner mode to planer mode. This disengages the limit switch.
- Raise the Selection Lever - Raise the selection lever to the up position. This engages the planar feed rollers and should only be used in this position when in planer mode.
- Connect to Power
- Rotate the Emergency Stop Button - The machine is now ready to plane.
We trust you will find this video to be beneficial. Please feel free to reach out to us HERE if you have any questions on how to make the planer jointer conversion.