Assembling Your G0733 Wood Lathe
Preparation
- Choose a location: Select a suitable spot for your lathe, considering the provided clearance specifications in the owner's manual.
- Unpack the lathe: Remove the shipping crate top, sides, and any internal packing materials.
Assembling the Base
- Remove shipping brackets: Carefully remove the shipping brackets from the lathe legs.
- Position the legs: Place the legs approximately 57.75 inches apart (inside to inside).
- Lift the lathe: With assistance, carefully lift the lathe onto the legs, ensuring even weight distribution and alignment of mounting holes.
- Secure the lathe: Attach the lathe to the legs using the provided cap screws and lock washers.
Leveling the Lathe
- Optional: Bolt to the floor: If desired, permanently bolt the lathe to the floor according to the owner's manual.
- Use adjustable feet: If using adjustable feet, lift one end of the lathe and install the feet. Repeat for the other side.
- Level the lathe: Use a level to ensure the lathe is level side to side and front to back. Tighten the hex nuts on the adjustable feet.
Installing Accessories
- Install tool rest: Insert the tool rest base into the lathe bed, securing it with the T-mount and lock nut.
- Attach tool rest: Insert the tool rest into the tool rest base and secure it in place.
- Mount storage basket: Attach the storage basket bracket to the stand and install the basket.
- Attach hand wheel: Secure the hand wheel handle to the tailstock.
Final Steps
- Test run: Conduct a test run of the lathe to ensure proper operation.
- Refer to manual: Consult the owner's manual for additional instructions and safety guidelines.
Note: Always prioritize safety and follow the specific instructions provided in your owner's manual.
This video shows unboxing and assembling the machine. You can follow along using the steps above.
We trust you will find this video to be beneficial. Please feel free to reach out to us HERE if you have any questions on how to assemble the lathe.