This video details the assembly of the G0634X Planer Jointer.

We've also included the instructions below if you'd like to follow along.

Preparation:

1. Review Manual: Read the provided user manual or access the online version on Grizzly.com.
2. Gather Support: Familiarize yourself with Grizzly's technical support for any questions.

Uncrating and Positioning:

1. Identify Lifting Points: Locate the three machine attachment points for lifting hooks or slings, if necessary.
2. Unbolt from Pallet: Unbolt the machine and position it on a suitable base (mobile base available on Grizzly.com).

Cleaning:

1. Remove Rust Preventative: Use a degreaser to remove the heavy-duty rust-preventative coating on unpainted surfaces.
• Caution: Avoid overspray on painted parts as it may cause damage.
2. Clean Tables: Remove shipping braces, unlock and lift the jointer tables for cleaning. Repeat on the planer table below.

Outfeed Table Adjustment:

1. Access Motor Panel: Remove the rear motor panel for access to the belt pulley.
2. Level Outfeed Table: Use a straightedge to adjust the outfeed table until it's level with the top dead center of the cutter head inserts.
3. Rotate and Check Contact: Rotate the cutter head with the motor belts and ensure light contact with the straightedge.
• Adjust the outfeed table as needed.

Final Assembly:

1. Install Guard: Install the cutter head guard assembly and tighten the lock knob for proper spring action.
2. Connect Power: Install the locking L6-30 plug and connect the machine to power.

Test Run:

1. Emergency Stop: Rotate the emergency stop button clockwise and turn on the machine. Verify smooth operation.
2. Power Off Test: Shut off the machine with the emergency stop button and verify it doesn't start when the button is pressed in.

Completion:

Your G0634X jointer planer is now assembled, cleaned, and ready for a test run.

We trust you will find this video to be beneficial. Please feel free to reach out to us HERE if you have any questions on how to setup the jointer planer.