- Safety first: Wear appropriate safety gear, including safety glasses and gloves.
- Unpack the jointer: Remove all packing materials.
- Clean the machine: Remove the rust preventative from the cast iron surfaces using solvent and rags. Allow sufficient drying time.
- Align pulleys: Use a straightedge to ensure proper alignment between the cutter head and motor pulleys.
- Adjust belt tension: Adjust the motor mount to achieve a quarter-inch deflection in the belt.
- Re-check alignment: After initial use, recheck the belt tension and pulley alignment.
- Install rear panel: Attach the rear panel to the jointer.
- Assemble fence: Follow the user manual for fence assembly.
- Review manual: Refer to the user manual for any additional assembly steps or troubleshooting.
- Test operation: Conduct a test run of the jointer to ensure proper function.
In this instructional video, you can follow along through the complete unboxing, inventorying, and assembly process of the Grizzly Industrial G0814 6-inch Jointer with a V-helical cutter head.
We trust you will find this video to be beneficial. Please feel free to reach out to us HERE if you have any questions on how to setup and maintain your jointer.