The T34310 Parts Washer requires only water-based, non-flammable cleaning solutions labeled for parts washers and safe for plastic components. Solvent-based, flammable, or caustic fluids must be avoided to prevent pump damage or fire hazards. Grizzly does not sell fluids but recommends using compatible industrial aqueous cleaners and following proper fluid maintenance and disposal practices.
The T34310 Parts Washer is designed for water‑based, non‑flammable cleaning solutions. These aqueous cleaners provide effective degreasing while remaining safe for the pump, seals, and tank materials.
Grizzly does not sell parts washer fluid, but there are many compatible aqueous products available from industrial supply retailers.
Use only water‑based, non‑flammable parts washer solutions.
Do not use gasoline, kerosene, mineral spirits, or other flammable or chlorinated solvents.
Recommended Fluids
For best performance, choose a cleaner that meets the following:
- Water‑based (aqueous)
- Non‑flammable
- pH between 6–8
- Labeled for use in parts washers
- Compatible with plastic pumps, hoses, and seals
- Optional: Includes rust inhibitors for metal protection
Many customers use simple, readily available cleaners, including:
- Dish soap and water
- Simple Green® water‑soluble degreasers
- Water‑based automotive parts‑cleaning solutions from local auto parts stores
Most aqueous cleaners are concentrates. Follow the manufacturer’s dilution instructions.
Fluids to Avoid
Do not use:
- Gasoline, diesel, kerosene
- Mineral spirits or paint thinner
- Lacquer thinner
- Naphtha or solvent‑based cleaners
- Brake cleaners containing chlorinated solvents
- Highly caustic or highly acidic cleaners
- Any flammable liquid (per OSHA regulations)
Using these fluids can damage the pump, void warranty coverage, and create severe fire hazards.
Using & Maintaining Fluid in the T34310
- Mix correctly
If your cleaner is concentrated, pre‑mix it in a separate container using the manufacturer’s dilution ratio. - Fill to the correct level
Add fluid until it meets the minimum level needed for the pump pickup. Do not overfill the basin. - Prime and test flow
Turn on the washer briefly to confirm smooth flow through the flexible nozzle. - Maintenance
- Skim oils from the surface as they accumulate.
- Replace fluid when heavily contaminated, foul‑smelling, or no longer cleaning effectively.
- Empty and clean the tank periodically to prevent sludge buildup.
FAQ: T34310 Parts Washer
Can the T34310 use solvent‑based or petroleum‑based cleaners?
No. The T34310 pump and hoses are not designed for solvent‑based fluids. Using petroleum‑based or flammable liquids is unsafe and may cause pump damage or fire hazards.
Can I use lacquer thinner in this parts washer?
No.
The T34310 is intended for water‑based solutions only and must not be used with lacquer thinner or any other flammable solvent.
How much fluid does the T34310 need?
The T34310 has a 40‑gallon capacity, but most users do not fill it completely.
Use only the amount needed to keep the pump pickup submerged — typically 12–20 gallons, depending on your cleaning needs.
Can I use hot water or heated solutions?
How often should I change the fluid?
Change it when:
- Cleaning performance drops
- The solution becomes heavily contaminated
- The tank develops sludge buildup
- The fluid manufacturer recommends replacement
Shops with heavy use may change fluid monthly; light use may require less frequent changes.
Is a specific brand recommended?
Grizzly does not endorse a specific brand, but any water‑based, non‑flammable parts washer solution is compatible.
Many customers use aqueous degreasers such as “Oil Eater”‑type products or other industrial water‑based cleaners.
How should I dispose of used fluid?
Used solution contains oils, grease, and metal particles. Follow local and state disposal regulations. Many areas treat used aqueous cleaner similarly to used shop wastewater.
Does the T34310 have a fluid filter?
Yes.
The T34310 includes an intake filter to help keep debris from entering the pump.
What are some suggested water‑based solutions for cleaning grease off automotive parts?
We recommend:
- Non‑flammable cleaners with a pH between 6–8
- Dish soap and water for light cleaning
- Simple Green® or similar water‑soluble degreasers
- Water‑based automotive parts‑washing fluids from auto parts stores
Avoid petroleum‑based or solvent‑based cleaners.
Do you have a mobile base that fits this parts washer?
Yes.
The T34310 footprint is 17‑1/8" × 39". It can be used with:
- T28922 Mobile Base
- T28346 Extension Bars (required due to the length)
Note: When filled with fluid, the parts washer has a higher center of gravity. Use extreme caution when moving it, especially across uneven surfaces.
Can I leave fluid in the tank when not in use?
Yes.
Close the lid when not in use to reduce evaporation and contamination. Replace the solution when it becomes dirty or loses effectiveness.
Can I run the pump without fluid?
No.
Running the pump dry can cause immediate and permanent pump damage.
Does the T34310 come with a light?
No.
This model does not include a built‑in light.
Can I clean carburetors or heavily varnished parts?
Yes, as long as you use a water‑based cleaning solution approved for that purpose.
Very heavy varnish may require additional soaking time.
Is the pump replaceable?
Yes.
Replacement pumps for the T34310 are available through Grizzly parts support.
Can this be used outdoors?
No.
The T34310 should be used indoors or under cover. Outdoor use may cause rust, electrical issues, and pump damage.