Replacing a bandsaw blade is a straightforward process that ensures the best performance and precision for your machine. Follow these steps to safely and efficiently change the blade on your bandsaw.

Wood Bandsaws & Vertical Metal Cutting Bandsaws

Step-by-Step Blade Change Procedure:

1. Disconnect the saw from power – Ensure safety by unplugging or switching off the machine.
2. De-tension the installed blade – Release the blade tension to facilitate removal.
3. Open the upper and lower doors – Access the internal components.
4. Remove the table pin (if equipped) – This allows clearance for blade removal.
5. Remove the blade – Wearing gloves, carefully slide the blade off the wheels, guiding it out of the bearings or other guide mechanisms.
6. Extract the blade through the table slot – Carefully pull the blade free.
7. Install the replacement blade – Reverse the removal steps to fit the new blade.
8. Tension and track the blade – Apply the correct tension and adjust tracking.
9. Adjust the guide mechanism – Ensure the guide bearings or supports are correctly positioned for proper blade operation.

Horizontal Metal Cutting Bandsaws

Step-by-Step Blade Change Procedure:

1. Disconnect the saw from power – Prevent accidental startup.
2. De-tension the installed blade – Loosen the blade tension for easy removal.
3. Open the upper and lower doors – Access the blade and components.
4. Remove the blade – Wearing gloves, carefully slide the blade off the wheels and out of the guide bearings or other guide mechanisms.
5. Install the replacement blade – Follow the reverse process to install the new blade.
6. Tension and track the blade – Ensure proper tensioning and alignment.
7. Adjust the guide mechanism – Set the guides correctly to ensure smooth operation.

Additional Tips

• Always wear gloves to protect your hands from sharp blade edges.
• Check the user manual for specific tensioning and tracking guidelines.
• Periodically inspect the guide bearings and tracking mechanism for wear and proper adjustment.
• Dispose of old blades properly according to your local safety regulations.

You can safely replace your bandsaw blade and maintain performance by following the steps above. Please refer to your bandsaw’s manual or contact Product Support HERE for assistance if you encounter any difficulties during these steps.