1. What are the power requirements for the G0490X Jointer?

The G0490X operates on 240V, single-phase, 60 Hz power.

• Amps: 15A
• Minimum circuit size: 20A
  It includes a 6 ft., 12 AWG power cord with a 6-20 plug for easy setup.

2. What type of switch does it have?

The jointer uses button controls with magnetic switch protection for safe and reliable operation.

3. What type of motor does the G0490X have?

The jointer is powered by a 3 HP TEFC capacitor-start induction motor with belt drive for smooth performance.

4. Are the bearings maintenance-free?

Yes. All bearings are sealed and permanently lubricated for long life and low maintenance.

5. What is the cutterhead speed?

The spiral cutterhead spins at 4,800 RPM, producing 19,200 cuts per minute for a smooth finish.

6. What type of cutterhead does it use?

The G0490X features a spiral cutterhead with 40 German-made indexable carbide inserts, providing quieter operation and superior cutting performance. Replacement inserts are H7319.

7. What is the maximum width and depth of cut?

• Maximum width of cut: 8"
• Maximum depth of cut: 1/8"

8. What are the bevel jointing capabilities?

The fence tilts 0–45° left or right for bevel jointing versatility.

9. What are the minimum workpiece dimensions?

• Minimum length: 10"
• Minimum thickness: 1/2"

10. Does it support rabbeting?

Yes. The G0490X includes a rabbeting table with a maximum depth of 1/2".

11. What are the table specifications?

• Table length: 76-3/8"
• Width: 8"
• Thickness: 1-1/2"
• Floor-to-table height: 32-5/8"
• Table movement: Parallelogram adjustment
• Adjustment type: Lever action

12. What about the fence?

• Height: 5"
• Mounting: Center-mounted with angle gauge
• Stops: 45°, 90°, and 135°
• Material: Cast iron for durability

13. What materials are used in construction?

• Table: Precision-ground cast iron
• Body: Cast iron
• Cabinet: Pre-formed steel
• Fence: Cast iron
• Guard: Die-cast metal
• Finish: Powder-coated green and putty

14. Does it include dust collection?

Yes. The G0490X includes a 4" dust port with a built-in dust chute for efficient chip removal.

15. Are additional accessories included?

Yes. The jointer comes with:

• A pair of push blocks
• Built-in mobile base for easy movement

16. What are other notable features?

• Parallelogram table adjustment for precise alignment
• Lever-adjusted tables with depth gauge
• Pedestal-mounted switch for easy access
• Poly-V serpentine belt and pulley system
• Extra-long infeed table for better stock support
• Shielded and lubricated bearings for durability

17. How long does assembly take?

Assembly and setup typically take about 2 hours.

18. Where is the G0490X manufactured?

The G0490X is manufactured in China.

19. Is it ISO certified or NRTL listed?

Yes. The G0490X is NRTL listed, but it is not ISO 9001 certified.

20. What is the warranty?

The jointer comes with a 1-year warranty.