Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
What power does the G0675 require?
The G0675 runs on 220V, single-phase, 60 Hz power. It has a full-load current rating of 9.9 amps and requires a minimum 15-amp circuit. The machine comes prewired for 220V and includes a 6-ft, 14-AWG power cord with a NEMA 6-15 plug.
How much horsepower does the motor have?
The G0675 features a 2.5 HP, single-phase, capacitor-start induction motor. It runs at 3400 RPM and uses a Poly-V belt drive system. Bearings are shielded and permanently lubricated for low maintenance.
What size are the jointer tables?
The jointer tables measure 12-1/2″ x 40-15/16″, giving plenty of surface area for accurate jointing.
How many knives does the cutterhead have and what size are they?
The cutterhead uses two HSS knives, each measuring 10-1/4″ x 11/16″ x 1/8″. The cutterhead has a 2-9/32″ diameter and spins at 6500 RPM, producing up to 13,000 cuts per minute.
What is the maximum depth of cut?
Jointer: Up to 1/8″
Planer: Up to 3/16″
What is the maximum width of cut?
Jointer: Up to 10-1/4″
Planer: Up to 9-3/4″
What is the maximum planing height?
The planer can handle stock up to 8-1/4″ high.
What is the feed rate of the planer?
The planer has a feed rate of 16 feet per minute (FPM).
What size is the fence and what angles can it bevel to?
The fence measures 5-7/8″ x 35-7/16″ and can bevel between 0° and 45°.
What size dust port does the G0675 have?
This machine comes equipped with a 4″ dust port for connecting to a dust collection system.
How tall is the jointer table from the floor?
The floor-to-table height of the jointer is 33-3/4″.
What are the overall dimensions of the machine?
The G0675 measures 46″ L x 27″ W x 38″ H.
How long does it take to assemble?
Assembly and setup take about 15 minutes.
Where is the serial number located?
The serial number can be found on the ID label on the front of the stand.
What is the warranty on the G0675?
This machine is covered by a 1-year warranty.
Where is the G0675 manufactured?
The G0675 is made in China. It is not ISO 9001 certified and is not certified by a Nationally Recognized Testing Laboratory (NRTL).
Key Specifications
Motor: 2.5 HP, single-phase, capacitor-start induction (3400 RPM)
Power Requirement: 220V, single-phase, 60 Hz
Full-Load Current Rating: 9.9A
Minimum Circuit Size: 15A
Switch Type: ON/OFF push button with safety cover
Cutterhead: 2-knife HSS, 2-9/32″ diameter, 6500 RPM
Maximum Depth of Cut: 1/8″ (jointer), 3/16″ (planer)
Maximum Width of Cut: 10-1/4″ (jointer), 9-3/4″ (planer)
Maximum Planing Height: 8-1/4″
Planer Feed Rate: 16 FPM
Dust Port Size: 4″
Table Sizes:
Jointer: 12-1/2″ × 40-15/16″
Planer: 9-3/4″ × 23-1/8″
Fence Size: 5-7/8″ × 35-7/16″, tilts 0°–45°
Overall Dimensions: 46″ L × 27″ W × 38″ H