Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
1. What is the difference between G0656X and G0656XW?
The G0656X has a 3 HP motor and is wired for a single-phase, 220V, 15A power supply circuit.
The G0656XW also has a 3 HP motor but is wired for a single-phase, 220V, 12A power supply circuit.
Additionally, the G0656X cutterhead speed is 4800 RPM, while the G0656XW cutterhead speed is 5350 RPM.
Aside from these differences and appearance, the two models are identical.
View G0656XW on Grizzly.com
2. What type of cutterhead does the G0656X have?
The G0656X features a spiral cutterhead with 40 indexable carbide inserts arranged in 4 rows for smoother cuts and reduced tear-out.
3. What is the maximum cutting width and depth?
- Maximum Cutting Width: 8"
- Maximum Depth of Cut: 1/8" per pass
4. What is the maximum rabbeting depth?
The G0656X can cut rabbets up to 1/2" deep.
5. What are the electrical requirements for the G0656X?
- Power Requirement: 240V, single-phase, 60 Hz
- Full-Load Current: 15A
- Minimum Circuit Size: 20A
- Power Cord: 6 ft, 14 AWG (plug not included)
- Recommended Plug Type: 6-20
6. What type of motor does the G0656X have?
The jointer is powered by a 3 HP TEFC capacitor-start induction motor running at 3450 RPM.
7. How fast does the cutterhead spin?
The cutterhead speed is 4800 RPM, producing 21,400 cuts per minute for a smooth finish.
8. What are the minimum workpiece dimensions?
- Minimum Length: 10"
- Minimum Thickness: 1/2"
9. What type of fence does the G0656X use?
The jointer includes a cast iron fence measuring 34-7/8" long × 5" high, with positive stops at 45°, 90°, and 135° for bevel and chamfer cuts.
10. What size dust port does the G0656X have?
The G0656X includes a 4-inch dust port for efficient dust collection.
Shop Dust Collection Accessories
11. Does the G0656X have a built-in mobile base?
Yes, the G0656X includes a built-in mobile base for easy movement around your shop.
Key Specifications
- Jointer Size: 8"
- Cutterhead Type: Spiral with 40 indexable carbide inserts
- Cutterhead Speed: 4800 RPM
- Cuts Per Minute: 21,400
- Table Size: 72-1/2" L × 9" W
- Fence Size: 34-7/8" L × 5" H
- Dust Port: 4"
- Motor: 3 HP, 240V, 15A