Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.

1. What is the difference between G0656 and G0656W?

• G0656: 3 HP motor, wired for 220V, 15A, cutterhead speed 4800 RPM.
• G0656W: 3 HP motor, wired for 220V, 12A, cutterhead speed 5350 RPM.
  Aside from these differences and appearance, the two models are identical.
  View G0656W on Grizzly.com

2. Is there a spiral cutterhead upgrade for this jointer?

Yes. The T27454 Spiral Cutterhead will fit the G0656W.

3. What are the electrical requirements for the G0656W?

• Power Requirement: 240V, single-phase, 60 Hz
• Full-Load Current: 12A
• Minimum Circuit Size: 20A
• Connection Type: Cord & Plug
• Included Plug Type: 6-20
• Power Cord: 6 ft, 12 AWG

4. What type of motor does the G0656W have?

The jointer is powered by a 3 HP TEFC capacitor-start induction motor running at 3450 RPM.

5. What is the maximum cutting capacity?

• Maximum Width of Cut: 8"
• Maximum Depth of Cut: 1/8" per pass
• Maximum Rabbeting Depth: 1/2"

6. What are the minimum workpiece dimensions?

• Minimum Length: 8"
• Minimum Thickness: 1/2"

7. What type of cutterhead does the G0656W have?

The G0656W uses a 4-knife cutterhead with HSS single-sided knives:

• Knife Length: 8-1/16"
• Knife Width: 3/4"
• Knife Thickness: 1/8"
• Cutterhead Speed: 5350 RPM
• Cuts Per Minute: 21,400

8. What type of fence does the G0656W use?

The jointer includes a cast iron fence measuring 35" long × 5" high, with positive stops at 45°, 90°, and 135°.

9. What size dust port does the G0656W have?

The jointer includes a 4-inch dust port for efficient dust collection.
Shop Dust Collection Accessories

Key Specifications

• Jointer Size: 8"
• Table Length: 73"
• Fence Length: 35"
• Motor: 3 HP, 240V, 12A
• Cutterhead: 4-knife, 5350 RPM
• Dust Port: 4"
• Mobile Base: Built-in