Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
1. What are the differences between the G1023S and G1023Z series table saws?
- G1023S: Basic cabinet table saw with the upgraded Shop Fox Classic Fence.
- G1023Z: Includes a rail-mounted switch, hinged motor cover, and Shop Fox fence.
- G1023Z with 5 HP motor: Same as G1023Z but with a 5 HP motor for heavier-duty cutting.
2. What is the maximum stack dado head width I can use with this saw?
The arbor will accommodate a 13/16" stack dado set.
3. Does this machine have a dust port?
Yes. It includes one 4-inch dust port for dust collection.
(Tip: A dust collector should handle at least 450 CFM for a 10" table saw.)
4. Can I install an aftermarket fence on this saw?
Yes. The table is a standard 27" deep, so most aftermarket fences will fit. Some may require rail modifications.
5. What is the maximum rip capacity?
- Right of blade: 26" with standard rails (52" with optional long rails, part G9221).
- Left of blade: 8".
6. How many V-belts does this saw use?
The saw uses three matched V-belts for smooth power transfer.
7. Are other motors available for this saw?
Yes. Grizzly offers 3 HP and 5 HP motors for this model.
8. Can I order this machine without the motor?
No. Removing the motor would increase labor costs, offsetting any savings. If you want a different motor, we recommend selling the stock motor privately.
9. Which way does the blade tilt?
The blade tilts to the right as viewed from the operator’s position.
10. What are the electrical requirements?
- Power: 220V, single-phase, 60 Hz
- Full-load current: 18A
- Minimum circuit size: 20A
- Power cord: 10 ft, 10 AWG (plug not included)
11. What is the maximum cutting depth?
- At 90°: 3-1/8"
- At 45°: 2-1/8"
12. What type of fence comes with this saw?
The saw includes a Shop Fox Classic Camlock T-Style Fence with HDPE face and heavy-duty steel rails.
Key Specifications
- Blade Size: 10"
- Arbor Size: 5/8"
- Arbor Speed: 4200 RPM
- Max Dado Width: 13/16"
- Table Size: 40" W × 27" D (with wings)
- Fence Rail Length: 47"
- Dust Port: 4"