Important Disclaimer
This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
What are the specifications of the Grizzly G1022SM Table Saw?
Rail dimensions: 44" x 1-3/8"
Maximum ripping capacity: 24"
Table size with extension wings: 27-1/8" x 40-5/8"
Table height: 37"
Arbor size: 5/8" x 1-1/4"
Cutting capacity at 90°: 3-1/8"
Cutting capacity at 45°: 2-1/8"
Motor: 1-1/2 HP, single-phase, 110V/220V (prewired to 110V)
What is the difference between the G1022SM and the G1022Z/G1022ZF Table Saws?
The G1022SM features stamped metal wings that are just as true and rigid as the cast iron wings, but without the extra weight. The G1022Z and G1022ZF models include additional features such as upgraded fences and larger motors.
What is the maximum stack dado blade width I can use with this saw?
The arbor will accommodate a dado stack up to 13/16" wide.
How do I install a dust hood on the G1022SM?
Our G2480 Dust Hood will fit when mounted on a plywood or sheet metal adapter placed between the saw body and the stand. Center the dust hood on the adapter, cut a square hole matching the inside flange of the hood, pre-drill, and secure with sheet metal screws.
What is the maximum width of cut to the right of the blade?
With standard rails: up to 24"
With optional extension rails: up to 48"
Is a larger motor available for this saw?
Yes, the G1022SM accepts all 3450 RPM motors with a NEMA-56 frame and a 5/8" shaft.
Can I order the G1022SM without a motor?
No. The labor cost to remove the stock motor would offset any savings. If you wish to use a different motor, we recommend selling the stock motor privately.
What are the dust collection requirements?
A dust collector capable of at least 450 CFM is recommended for this 10" table saw. Actual performance may vary depending on hose length, fittings, and system efficiency.
Can I install an aftermarket fence on the G1022SM?
Yes. The table is a standard 27" deep. Some aftermarket fences may require modifications to mount the rails.
Which way does the blade tilt?
The blade tilts to the right when facing the saw from the operator's position.
What is the cutting capacity of the G1022SM?
At 90°: up to 3-1/8"
At 45°: up to 2-1/8"