Dust Collection
Does this machine come with a dust port?
Yes. It includes a 2" dust port on the belt side only.
How many dust ports does it have and what sizes?
Two ports: 2" and 2-1/2".
Tables & Accessories
Can I get an additional table assembly for the belt side?
Yes. You can order Part Number P10140234A by calling our customer service team.
What is the table size and tilt range?
Each table measures 12-1/4" x 6", tilts 0° left and 45° right.
What is the table height from the floor?
Approximately 35 inches.
Sanding Belt & Disc
What size belt and disc does this machine use?
- Belt: 6" x 48"
- Disc: 9" diameter
What is the belt speed and disc speed?
- Belt: 1900 FPM
- Disc: 2420 RPM
Are the belts easy to change?
Yes. It has a quick-release tension system.
What type of joints do the sanding belts have?
Lap joints.
How do the sanding discs attach?
They use pressure-sensitive adhesive (PSA) backing.
Does this machine come with sandpaper?
Yes. It includes a 100-grit disc and belt.
Machine Features
What is the purpose of the graphite pad?
It reduces friction between the belt and platen during sanding.
Will the belt assembly lock in any position?
Yes. It locks anywhere between horizontal and vertical.
What is the maximum height of the belt in vertical position?
56 inches.
Electrical & Motor
What are the power requirements?
- 110V or 220V, single-phase, 60 Hz
- Prewired for 110V
- Full-load current: 12A at 110V, 6A at 220V
- Minimum circuit: 15A
Does it include a power cord and plug?
Yes. It comes with a 72" cord and a 5-15 plug for 110V.
What type of motor does it have?
- 3/4 HP, TEFC capacitor-start induction motor
- Speed: 3450 RPM
Construction & Other Info
What materials is it made from?
- Base, frame, and disc: Cast iron
- Stand: Preformed steel
- Table: Cast iron
Is a stand included?
Yes. The machine is complete as shown.