FAQ: G1013 Combination Sander (Discontinued) – Support Home

Important Disclaimer:
This article references a model that is no longer in production. Availability of replacement parts or accessories is not guaranteed.

1. What are the power requirements for the G1013 Sander?

The G1013 operates on 110V or 220V, single-phase, 60 Hz power.

Prewired voltage: 110V
Full-load current rating: 12A at 110V / 6A at 220V
Minimum circuit size: 15A
It includes a 9 ft., 18 AWG power cord and plug for easy setup.

2. What type of switch does it use?

The sander is equipped with a toggle safety switch with a removable key, preventing accidental or unauthorized operation.

3. What kind of motor powers the G1013?

The G1013 uses a 1/2 HP TEFC capacitor-start induction motor with:

Amps: 12A at 110V / 6A at 220V
Speed: 1720 RPM
Bearings: Sealed and permanently lubricated
Power transfer: Reliable belt drive

4. What are the belt sander specifications?

Belt size: 1" wide x 42" long
Belt speed: 3000 FPM
Platen: Steel, 5-1/4" L x 1" W
Table size: 8" L x 6-1/2" W (3/16" thick)
Max belt height (vertical): 21"
Belt tension release: Quick release for fast changes

The narrow 1" belt is ideal for detail sanding and can even be fed through holes for internal sanding.

5. What are the disc sander specifications?

Disc diameter: 8"
Disc speed: 1725 RPM
Sandpaper type: PSA (pressure-sensitive adhesive)
Disc table size: 12-1/2" L x 5" W (1" thick cast iron)
Table tilt: 0° left to 45° right

6. What materials is the G1013 constructed from?

Base & belt table: Stamped steel
Disc table: Cast iron for stability
Frame: Steel
Disc: Aluminum
Miter gauge: Plastic head with aluminum bar
Finish: Durable powder-coated paint

7. Does the G1013 include a miter gauge slot?

Yes. The disc table includes a 3/4" wide x 3/8" high slot, compatible with the included miter gauge.

8. How long does assembly take?

Assembly and setup take approximately 1 hour.

9. Where is the serial number located?

The serial number is located on the ID label on the front, right-hand side of the machine.

10. Is the G1013 factory-certified?

Country of origin: Taiwan
ISO 9001 certified factory: No
NRTL certification: No

11. What safety and convenience features are included?

Spring-loaded arm for proper belt tension
Quick belt release for easy changes
Tilting tables on both belt and disc
Narrow 1" belt for detail sanding, even inside openings

12. Does this machine come with a dust port?

No. The G1013 does not include a dust port.

13. Does the disc table tilt?

Yes. The disc table tilts up to 45°, allowing for angled sanding operations.

14. Does this machine come with a miter gauge?

Yes. A miter gauge is included.

15. Can this machine perform internal sanding?

Yes. The G1013 can be reconfigured for internal sanding, as outlined in the instruction manual.

16. What are the differences between the G1013 and the G3105?

G1013: Belt-driven, more torque, supports internal sanding
G3105: Two-wheel design, quieter and smoother, does not support internal sanding

17. What grit sizes are available?

1" x 42" sanding belts: 60–220 grit
8" sanding discs: 60–220 grit

18. Is there a stand available for this machine?

Yes. The G3056 tool table is an ideal stand for the G1013.

19. Can this machine be wired for 220V?

Yes. While not necessary for performance, rewiring to 220V can help the motor run cooler and last longer.