What is the chuck size on the Grizzly G7946 Drill Press?

The G7946 Radial Drill Press comes with a JT33 key chuck that holds drill bits from 1/16" to 5/8".

What is the drilling capacity of the G7946 Drill Press?

The maximum drilling capacity is 1/2" in mild steel. This makes it suitable for woodworking, hobby metalworking, and general shop use.

What does swing mean on a drill press?

Swing is the maximum diameter of material that can be drilled in the center of the table. It is measured as the distance between the column and the spindle centerline, multiplied by 2.

What is the maximum swing on the Grizzly G7946?

The G7946 has a 34" maximum swing, with a 17" maximum distance from spindle to column.

How much spindle travel does the G7946 have?

The spindle travel is 3-1/4", allowing deeper drilling in a single pass.

How many speeds does the G7946 Radial Drill Press have?

It features 5 spindle speeds, ranging from 550 to 3000 RPM.

How far does the head tilt and swivel?

• Head tilt: 90° left and 45° right.

• Head swivel: Full 360° rotation around the column.

How far does the table tilt and swivel?

The cast-iron table tilts 90° left and right, swivels 360° around its center, and also swivels 360° around the column for maximum flexibility.

How does the chuck attach to the spindle?

The chuck mounts to the spindle with a Jacobs Taper #33. This friction-fit taper must be clean and free of grease or debris to seat properly.

Can a mortising attachment be used with the G7946?

No. Mortising attachments are not recommended for radial drill presses. The extended head design and pressure of mortising can cause flexing, making it difficult to achieve accurate cuts.

Does the G7946 Radial Drill Press have a built-in light?

No, this model does not include a built-in work light.

Does it include a depth stop?

Yes, the G7946 comes with an adjustable hub-style depth stop for repeatable drilling.

What type of motor does the G7946 have?

It has a 1/2 HP, 120V, single-phase TEFC induction motor with shielded, permanently lubricated bearings and a V-belt drive system.

What are the power requirements?

This drill press requires a 120V, 15A circuit and comes with a 7-foot power cord and 5-15 plug.

What is the construction quality of the G7946 Drill Press?

The head, spindle housing, table, and base are precision-ground cast iron, while the column is heavy-duty steel for strength and stability.

Where is the G7946 Radial Drill Press made?

The G7946 is manufactured in China at an ISO 9001-certified factory, with additional inspection at Grizzly’s U.S. facilities to ensure quality.