What are the specifications of the Grizzly G7945 Drill Press?
Type: Radial drill press
Swing: 34"
Spindle travel: 3-1/4"
Spindle taper: JT#33
Chuck size: 1/16" – 5/8" JT33 key chuck
Motor: 1/2 HP, single-phase, 120V, 1725 RPM, TEFC capacitor-start induction, V-belt drive
Number of spindle speeds: 5 (550–3000 RPM)
Maximum head tilt: Left 90°, Right 45°
Maximum head swivel: 360°
Table size: 9" L x 8-5/8" W, 1-1/4" thick
Table tilt: 90° left and right (scale reads up to 45°)
Table swing/swivel: 360° around column and center
Column diameter: 2.36"
Depth stop: Threaded rod with positive stop
Construction: Precision-ground cast iron table, cast iron spindle housing, head, and base; steel column
Assembly time: Approximately 30 minutes
What is the smallest drill the chuck will hold?
The chuck can hold drills as small as 1/16".
What does swing mean?
Swing is the distance between the column and the centerline of the chuck, multiplied by two.
What is the maximum swing on this machine?
The maximum swing is 17", allowing the drill press to handle larger workpieces.
Is a mortising attachment available for this drill press?
No. Due to the construction of radial drill presses, using a mortising attachment is not recommended. The extended head and pressure required to cut mortises can cause the head to flex, making precise mortises difficult.
How much travel does the spindle have?
The spindle has 3-1/4" of travel.
How far will the table tilt?
The table tilts up to 90° in both directions, though the scale reads 45°.
How does the chuck attach to the spindle?
The chuck attaches directly to the spindle with a Jacobs taper 33. This friction-fit taper must be clean and free of grease or dirt to ensure proper alignment.
Does this drill press have a built-in light?
No, this model does not include a work light.
Does this machine have an adjustable depth stop?
Yes, it includes a threaded rod with a positive stop for accurate depth control.
What is the drilling capacity of the G7945 Drill Press?
This drill press can drill up to 1/2" in mild steel, making it suitable for a variety of woodworking and light metalworking tasks.