⚠️ Important Disclaimer
This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
General Questions
Where is the serial number located?
The serial number is on the ID label on the head of the machine.
How long does assembly take?
Assembly and setup typically take about 45 minutes.
Where is the G7944 manufactured?
This drill press is made in China under ISO 9001 quality standards.
What is the warranty?
The G7944 comes with a 1-year warranty from the date of purchase.
Does this machine have a built-in light?
Yes, the drill press has a built-in work light.
What kind of bulb does it use?
It uses a standard 60 W bulb with a 120V socket.
Motor & Electrical
What are the electrical requirements?
120V, Single-Phase, 60 Hz
Full-load current: 7.5A
Minimum circuit: 15A
Prewired voltage: 120V
Connection: Cord & plug (power cord included, plug type 5-15)
Switch: Paddle safety switch with removable key
What type of motor does it use?
3/4 HP, single-phase, 1725 RPM TEFC capacitor-start induction motor with shielded, permanently lubricated bearings.
How is power transferred to the spindle?
Via a V-belt drive.
Spindle & Drilling
What is swing, and what is the maximum swing on this machine?
Swing refers to the distance between the column and the centerline of the chuck, multiplied by 2.
The maximum swing for the G7944 is 14".
How much spindle travel is there?
The spindle has 3-1/4" of vertical travel.
What is the spindle taper?
MT#2 Morse taper.
How does the chuck attach to the spindle?
The chuck attaches via a spindle arbor. One end has a Jacobs® taper for the drill chuck, and the other has a Morse taper for the spindle. Both tapers rely on friction and must be free of grease and dirt.
What is the smallest drill the chuck will hold?
The chuck will hold a 1/16" drill.
How many spindle speeds does this drill press have?
12 speeds, ranging from 140 to 3050 RPM.
Does this drill press have an adjustable depth stop?
Yes, it includes an adjustable hub-type depth stop.
Table & Workpiece
What are the table dimensions and tilt?
Table size: 11-3/8" × 11-3/8" × 1-1/4" thick
Vertical travel: Crank handle operation
Table tilt: 90° left and right, with scale up to 45°
Table swing around center: 360°
Table swivel around column: 360°
Maximum movement of work table: 25-3/4"
T-slots: 4, 5/8" wide, 3-7/8" centers
Will "T" bolt clamping kits fit the table?
Yes, the G1075 3/8" Clamping Kit is compatible.
Column & Base
What is the column diameter?
The column diameter is 3.150".
What is the base size?
Base length: 18"
Base width: 11"
Is this drill press compatible with a mobile base?
Yes, it is compatible with the D2260A mobile base.
Spindle Head & Accessories
What is the max distance from spindle to column and table?
Max distance from spindle to column: 7"
Max distance from spindle to table: 31-1/2"
What size mortising attachment fits this drill press?
The G1083 Mortising Attachment fits; it has a collar diameter of 2-19/32".
Max drilling capacity in mild steel?
3/4".
Maximum head swivel?
360°.
Construction & Finish
Table: Precision-ground cast iron
Column: Steel
Spindle housing: Cast iron
Head: Cast iron
Base: Cast iron
Paint/finish: Enamel