Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
1. What is the smallest drill bit the chuck will hold?
The chuck can hold a number 60 drill bit, which is approximately 0.040" in diameter.
2. Is this machine gear head or belt driven?
This is a belt-driven, variable-speed drill press. It offers smooth speed adjustments without the complexity of a gear head system.
3. What does “swing” mean on a drill press?
Swing refers to twice the distance from the center of the spindle (chuck) to the nearest edge of the column. It represents the maximum diameter of material that can be drilled at the center.
4. What is the maximum swing on this machine?
The maximum swing is 17 inches, meaning you can drill into the center of a 17" wide workpiece.
5. Can I put a larger chuck on this machine?
Yes. The spindle has a Morse Taper #3 (MT#3), which allows you to install a larger chuck if needed.
6. How much travel does the spindle have?
The spindle travel is 6-1/4 inches, providing deep drilling capacity for thicker materials.
7. Will the table tilt?
No. The table on this drill press is fixed and does not tilt.
8. How does the chuck attach to the spindle?
The chuck attaches using a spindle arbor with a Morse taper on one end and a Jacobs® taper on the other. These tapers are pressed together and secured by friction, so both surfaces must be clean and free of grease or dirt.
9. What is the column diameter?
The column diameter is 4-1/64 inches, providing excellent stability during drilling operations.
10. Does this machine have an adjustable depth stop?
Yes. It includes an adjustable depth stop for precise and repeatable drilling depths.
11. Will any of the “T” bolt clamping kits fit the table?
Yes. The G1076 1/2" Clamping Kit is compatible with this drill press table.
Key Specifications
- Motor: 2 HP, Single Phase
- Voltage: 110/220V
- Speed Range: 300 – 2000 RPM (variable)
- Spindle Taper: MT#3
- Chuck Size: 5/8"
- Swing: 20"
- Spindle Travel: 6-1/4"
- Drilling Capacity: 1-1/4" in steel
- Table Size: 22" × 19-1/2"
- T-Slot Size: 1/2"
- Overall Height: 73"