What are the electrical requirements for the G9741?
The planer requires 220V or 440V, 3-phase, 60 Hz power. It draws 30A at 220V and 15A at 440V.
Does it include a power cord?
Yes, a 4 ft., 10 AWG cord is included for 220V connection.
Can this machine be converted to 440V?
Yes, a voltage conversion kit (P97400120-11) allows conversion to 440V.
What type of motors does the G9741 have?
The main motor is 10 HP, 3-phase, TEFC induction. The feed motor is 1 HP, and the table elevation motor is 1/2 HP; all are 3-phase TEFC induction motors with chain or belt drives.
What are the feed rates?
Planing feed rates range from 20 to 40 FPM.
What type of cutterhead does the G9741 have?
It features a 4-knife HSS cutterhead. Knives are single-sided, solid HSS, 24-1/8" x 1-3/16" x 1/8".
What is the maximum cut width and height?
Maximum cut width is 24", and maximum stock thickness is 9". Minimum thickness is 1/4", and minimum length is 10-1/2".
What is the maximum depth of cut?
Full-width cut: 1/8"
6" wide board: 5/16"
What are the table specifications?
Table bed: 24" x 35-1/2" x 6"
Table movement: 1/4" – 9"
Floor-to-table height: 24" – 33" adjustable
Two bed rollers are included.
What materials are used in construction?
Table: precision-ground cast iron
Body: cast iron
Cutterhead assembly: steel
Infeed roller: segmented steel
Outfeed roller: smooth steel
What safety and convenience features are included?
Control panel with magnetic switch protection, table height adjustment buttons with micro-adjust handwheel, table height lock, variable feed speed, and bed rollers.
What type of dust port is included?
One 5" dust port is included; a dust collector is recommended.
Where is the G9741 made?
Manufactured in Taiwan.
What is the warranty?
1-year limited warranty.
How long does assembly take?
Approximately 15 minutes.
What’s the difference between the G9961 and G9741?
The G9961 has a spiral cutterhead, while the G9741 has four 1/8" thick HSS knives. The G9741 can also be converted to 440V, 3-phase, which adds voltage flexibility.