1. What are the power requirements for the G7213Z Planer?

The G7213Z operates on 220V or 440V, 3-phase, 60 Hz power.

• Amps: 26A at 220V / 13A at 440V
• Minimum circuit size: 40A at 220V / 20A at 440V

2. How is the planer connected to power?

The planer does not include a plug. For 220V 3-phase operation, we recommend a NEMA L15-30 plug. 440V operation will require different wiring specifications.

3. Can I convert the planer to 440V?

Yes. Please purchase G440VG7213Z 440V conversion kit. (Includes: P7213Z302A, 302B, 302C, or 302D, plus labor)

• A recommended phase converter is the G7979.
• ⚠️ Important: Grizzly must perform the conversion at purchase to preserve the warranty.
• Fee: $250, with additional lead time required.

4. How is the planer switched on and off?

The G7213Z uses a control panel with magnetic switch protection for safe operation.

5. What type of motors does the G7213Z have?

• Main Motor: 7.5 HP, 3-phase TEFC induction, twin V-belt drive, 3500 RPM, 20A/10A
• Feed Motor: 2 HP, 3-phase TEFC induction, belt drive with variable-speed pulley, 3500 RPM, 6A/3A

6. Are the bearings maintenance-free?

Yes. All bearings are sealed and permanently lubricated for long life and low maintenance.

7. What is the planing feed rate?

The G7213Z offers variable feed rates between 17–26 FPM.

8. What is the maximum cut depth?

• Full-width boards: 1/16"
• 6-inch-wide boards: 1/8"

9. What is the cutterhead specification?

• Type: 4-knife HSS, single-sided, solid
• Diameter: 3-1/8"
• Knife size: 24" × 1" × 1/8"
• Adjustment: Jack screws
• Cutterhead speed: 5,200 RPM
• Cuts per minute: 20,800
• Cuts per inch: 67–102

10. Does it support board return rollers?

Yes. Board return rollers are included for efficient workflow.

11. What are the table specifications?

• Table bed: 31-1/8" L × 24-1/8" W × 3-1/4" thick
• Floor-to-table height: 24–33"
• Table/headstock movement: 8"
• Number of bed rollers: 2

12. What materials are used in construction?

• Table: Precision-ground cast iron
• Body: Cast iron
• Cutterhead: Steel
• Infeed roller: Segmented steel
• Outfeed roller: Smooth steel
• Finish: Green powder-coated paint

13. Does the table have measurement scales?

Yes. The G7213Z includes inch and metric scales and lever-adjustable bed rollers.

14. Does the G7213Z support dust collection?

Yes. It includes a 5" dust port for connection to a dust collection system. Dust covers protect vertical support columns and leadscrews.

15. What are the key features of the G7213Z?

• 4-knife cutterhead
• Twin V-belt drive for main motor
• Variable-speed belt drive for feed motor
• Handwheel depth adjustment
• Table locks
• Segmented chip breaker
• Grease fittings on cutterhead
• Heavy-duty cast-iron construction

16. Is it compatible with a mobile base?

Yes. The G7213Z is compatible with the D2058A mobile base (sold separately).

17. How long does assembly take?

Assembly and setup typically take about 15 minutes.

18. Where is the planer manufactured?

The G7213Z is manufactured in Taiwan.

19. Is it ISO certified or NRTL listed?

No. This model is not ISO 9001 certified and is not NRTL listed.

20. What is the warranty?

The G7213Z comes with a 1-year warranty.

21. What’s the difference between the G7213Z and G5851Z?