What are the electrical requirements?
G0454Z: 240V, single-phase, 60 Hz; 25A full-load; 30A minimum circuit.
G0454ZX: 220V, single-phase, 60 Hz; 22A full-load; 30A minimum circuit.
Both models include a 12 AWG power cord with L6-30 plug (G0454Z: 6-1/2 ft., G0454ZX: 98 in.).
What type of motor do these planers have?
Both are equipped with a 5 HP, single-phase, TEFC capacitor-start induction motor running at 3450 RPM.
G0454Z: Power delivered via triple V-belt drive.
G0454ZX: Uses a belt drive system with shielded, permanently lubricated bearings.
What is the cutting capacity?
Both models share:
Planer size: 20"
Max. cut width: 20"
Max. stock thickness: 8"
Min. stock thickness: 3/16"
Min. stock length: 8"
Max depth of cut (full width): 1/16"
Max depth of cut (6" wide board): 1/8"
What are the cutterhead specifications?
Rows: 4
Indexable carbide inserts: 98 (14 mm x 14 mm x 2 mm)
Diameter: G0454Z – 3-1/8", G0454ZX – 3-3/16"
Cutterhead speed: G0454Z – 4800 RPM; G0454ZX – 4902 RPM
Cuts per minute: G0454Z – 20,000; G0454ZX – 19,608
Feed rates: G0454Z – 16 & 20 FPM; G0454ZX – 15 & 20 FPM
Replacement Inserts: G0454Z – T21348; G0454ZX – H7319
What are the table and roller specifications?
Table movement: G0454Z – 8"; G0454ZX – 8-3/4"
Main table size: G0454Z – 25-3/4" x 20" x 1-3/4"; G0454ZX – 25-1/2" x 20-7/8" x 2-3/8"
Extension wings: G0454Z – 55-1/2" x 20" x 1-3/4"; G0454ZX – 15-1/16" x 21-1/4"
Bed rollers: 2 adjustable on both
Floor-to-table height: G0454Z – 26-1/2" to 34-1/2"; G0454ZX – 26-1/2" to 35-1/4"
What materials and construction are used?
Table & extension wings: Precision-ground cast iron
Body: Cast iron
Stand: Steel
Cutterhead assembly: Steel
Infeed roller: Serrated steel
Outfeed roller: Rubber-coated
Finish: G0454Z – green & putty powder coating; G0454ZX – enamel
What safety and convenience features are included?
Both models feature:
Magnetic or control-panel switch with overload/magnetic protection
Chip breaker, pressure bar, and anti-kickback fingers
Board return rollers
Two adjustable bed rollers
Four-column support with dual table locks
Built-in mobile base
Additional notes:
G0454Z includes a two-speed automatic feed with gearbox
G0454ZX includes a control panel feed with magnetic switch
What dust collection is required?
Both have a 5" dust port. A dust collector is recommended for safe operation.
How long does assembly take?
Approximately 1 hour for both models.
Serial number and warranty information
G0454Z: Serial number on ID label at top of headstock
G0454ZX: Serial number on ID label
Warranty: 1 year for both
Origin: China
NRTL certified: Yes for both
ISO 9001: G0454ZX only
How do the G0453Z, G0454Z, G0454ZX, and G1033X planers compare?
All four are heavy-duty spiral/helical cutterhead planers, but they differ in size, power, and performance features:
Model | Planer Size | Motor | Full-Load Amps | Circuit Size | Cutter Inserts | Dust Port | Feed Rates | Notes |
---|---|---|---|---|---|---|---|---|
G0453Z | 15 in. | 3 HP, single-phase | 15A | 20A | 74 inserts | 4 in. | 16 & 30 FPM | Compact size; best for smaller shops |
G0454Z | 20 in. | 5 HP, single-phase | 25A | 30A | 98 inserts | 5 in. | 16 & 20 FPM | Heavy-duty 20"; slower max feed |
G0454ZX | 20 in. | 5 HP, single-phase | 22A | 30A | 98 inserts | 5 in. | 15 & 20 FPM | Similar to G0454Z but ISO 9001 certified, slightly faster cutterhead |
G1033X | 20 in. | 5 HP, single-phase | 23A | 30A | 92 inserts | 5 in. | 16 & 28 FPM | Strong 20" option; faster feed but fewer inserts |