Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
1. Is there a spiral cutterhead upgrade for the G0454 planer?
Yes. The T27694 Spiral Cutterhead is fully compatible with the G0454 planer. This upgrade provides smoother cuts, reduced tear-out, and quieter operation compared to the standard straight-knife cutterhead.
2. What is the difference between G0454 and G0454W?
The G0454 and G0454W are very similar, but there are a few key differences:
- Motor Amperage:
- G0454: 5 HP motor, draws 19A
- G0454W: 5 HP motor, draws 20A
- Cutterhead Speed:
- G0454: 4800 RPM
- G0454W: 5000 RPM
Aside from these differences and minor appearance changes, the two models are identical.
3. What is the difference between G0454 and G0454Z?
- G0454Z: Comes equipped with a spiral cutterhead for improved finish and quieter operation.
- G0454: Comes with four 1/8" thick HSS knives in a straight-knife cutterhead.
Other than these differences and appearance, the two models are identical.
4. What are the electrical requirements for the G0454 planer?
- Power Requirement: 240V, single-phase, 60 Hz
- Full-Load Current: 19A
- Minimum Circuit Size: 30A
- Plug Type: L6-30 (included)
- Power Cord: 6.5 ft, 12 AWG
5. What is the maximum cutting capacity?
- Max Cutting Width: 20"
- Max Cutting Depth (full width): 1/8"
- Max Cutting Depth (6" board): 1/8"
- Max Stock Thickness: 8"
- Min Stock Thickness: 3/16"
6. What is the cutterhead configuration?
- Cutterhead Speed: 4800 RPM
- Number of Knives: 4
- Knife Type: HSS, single-sided, solid
- Knife Dimensions: 20" L × 1" W × 1/8" T
7. Does the G0454 include a mobile base?
Yes, the G0454 planer comes with a built-in mobile base for easy movement around your shop.
8. What size dust port does the G0454 have?
The planer includes one 5-inch dust port for efficient dust collection.
Quick Specs Overview
- Planer Size: 20"
- Motor: 5 HP, TEFC capacitor-start induction
- Feed Rate: 16 & 20 FPM
- Construction: Precision-ground cast iron table, steel stand
- Dust Collection: 5" port