What are the power requirements for the G1033X?
The planer requires 220V, single-phase, 60 Hz power. It is prewired for 220V, has a full-load current rating of 23 amps, and should be connected to a 30-amp circuit.
Does the G1033X include a power cord and plug?
Yes. The machine comes with a 10 ft., 12 AWG power cord and a NEMA L6-30 plug.
What type of motor does the G1033X have?
It is equipped with a 5 HP, single-phase, TEFC capacitor-start induction motor running at 3450 RPM. Power is transferred through a triple V-belt drive, and the bearings are shielded and permanently lubricated.
What is the maximum cutting capacity?
Planer size: 20 in.
Max. cut width: 20 in.
Max. stock thickness: 8 in.
Min. stock thickness: 1/4 in.
Min. stock length: 7 in.
What is the maximum depth of cut?
Full 20 in. width: 5/64 in.
6 in. wide board: 1/8 in.
What is the cutterhead speed and feed rate?
The helical cutterhead runs at 5000 RPM, delivering up to 20,000 cuts per minute. The planer has two feed rates: 16 and 28 FPM.
How many cutters are on the helical cutterhead?
The cutterhead has:
4 rows of cutters
92 indexable carbide inserts (15 mm x 15 mm x 2.5 mm, 30°)
3-1/4 in. cutterhead diameter
What are the table specifications?
Table size: 56 in. long x 20 in. wide x 2-1/4 in. thick
Table movement range: 8 in.
Bed rollers: 2 adjustable rollers
Floor-to-table height: Adjustable 26 – 34 in.
What construction materials are used?
Table: Precision-ground cast iron
Body: Cast iron
Infeed roller: Serrated steel
Outfeed roller: Smooth steel
Extension wings: Heavy-duty cast iron
Finish: Powder coated
What dust collection is required?
The planer includes one 5 in. dust port. A dust collector is strongly recommended for efficient operation.
What safety and support features are included?
Magnetic switch with overload protection
Anti-kickback fingers
Extra-large ball bearing return rollers
All ball bearing construction
Drive gears running in an oil bath
Four heavy-duty support columns
Two-speed automatic feed
Is the G1033X compatible with a mobile base?
Yes. It is designed to work with the D2058A mobile base.
How long does it take to assemble?
Assembly and setup take approximately 2 hours.
Where is the serial number located?
The serial number is found on the ID label of the machine.
What warranty does the G1033X include?
The planer comes with a 1-year warranty, is manufactured in an ISO 9001 factory in Taiwan, and is certified by a Nationally Recognized Testing Laboratory (NRTL).