1. What are the power requirements for the G0544 Planer?
The G0544 operates on 220V, single-phase, 60 Hz power.
- Amps: 37A
- Minimum circuit size: 50A
The planer is permanently hardwired to a shutoff switch for safe operation.
2. How is the planer switched on and off?
It features a convenient control panel with magnetic switch protection, ensuring safe and reliable operation.
3. What motors does the G0544 have?
- Main Motor: 5 HP, single-phase TEFC capacitor-start induction, 3450 RPM, 25A, twin V-belt drive
- Feed Motor: 2 HP, single-phase TEFC capacitor-start induction, 3450 RPM, 12A, belt drive with variable-speed pulley
4. Are the bearings maintenance-free?
Yes. All bearings are shielded and permanently lubricated for long life and low maintenance.
5. What is the planing feed rate?
The G0544 offers variable feed rates between 17–26 FPM for optimal control.
6. What is the maximum cut depth?
- Full-width boards: 1/16"
- 6-inch-wide boards: 1/8"
7. What is the cutterhead specification?
- Type: Spiral cutterhead
- Diameter: 3-1/8"
- Number of cutter rows: 4
- Number of indexable cutters: 96
- Cutter insert type: 30° indexable carbide
- Cutterhead speed: 5,200 RPM
- Cuts per minute: 20,800
- Cuts per inch: 66–101
8. Does it include board return rollers?
Yes. Board return rollers are included for efficient workflow.
9. What are the table specifications?
- Table bed: 21-1/4" L × 28-1/4" W × 3" thick
- Floor-to-table height: 22-1/2" to 30"
- Table/headstock movement: 8"
- Number of bed rollers: 2
10. What materials are used in construction?
- Table: Precision-ground cast iron
- Body: Cast iron
- Cutterhead assembly: Steel
- Infeed roller: Segmented steel
- Outfeed roller: Smooth steel
- Finish: Powder-coated green
11. Does the table include measurement scales?
Yes. Both inch and metric scales are provided, along with lever-adjustable bed rollers.
12. Does the G0544 support dust collection?
Yes. It includes a 5" dust port, and dust covers protect vertical support columns and leadscrews.
13. What are the key features of the G0544?
- 4-row spiral with 96 inserts
- Insert size & type: 14 x 14 x 2mm, indexable carbide (H7319)
- Twin V-belt drive for main motor
- Variable-speed belt drive for feed motor
- Handwheel depth adjustment
- Segmented chip breaker & infeed roller
- Table locks
- Variable feed speed
- Grease fittings on cutterhead
- Precision-ground cast-iron bed
- Heavy-duty cast-iron construction
- Board return rollers
- Dust covers for vertical supports and leadscrews
14. Is it compatible with a mobile base?
Yes. The G0544 is compatible with the D2058A mobile base (sold separately).
15. How long does assembly take?
Assembly and setup typically take about 15 minutes.
16. Where is the G0544 manufactured?
The G0544 is manufactured in Taiwan.
17. Is it ISO certified or NRTL listed?
No. This model is not ISO 9001 certified and is not NRTL listed.
18. What is the warranty?
The G0544 comes with a 1-year warranty.
19. What is the difference between the G5850Z and G0544?
- G0544: Equipped with a spiral cutterhead
- G5850Z: Equipped with four 1/8" thick HSS knives
Aside from these differences and appearance, the two models are identical.