What are the power requirements for the G0453Z?
The planer requires 240V, single-phase, 60 Hz power. It is prewired for 240V, has a full-load current rating of 15 amps, and should be connected to a 20-amp circuit.
Does the G0453Z include a power cord and plug?
Yes. The machine includes a 5 ft., 12 AWG power cord and comes with a NEMA 6-20 plug pre-installed.
What type of motor does the G0453Z have?
The planer is equipped with a 3 HP, single-phase, TEFC capacitor-start induction motor running at 3450 RPM. It transfers power through a triple V-belt drive, and the bearings are sealed and permanently lubricated.
What is the maximum cutting capacity?
Planer size: 15 in.
Max. cut width: 15 in.
Max. stock thickness: 8 in.
Min. stock thickness: 3/16 in.
Min. stock length: 8 in.
What is the maximum depth of cut?
Full 15 in. width: 3/32 in.
6 in. wide board: 1/8 in.
What is the cutterhead speed and feed rate?
The spiral cutterhead runs at 4800 RPM, producing up to 20,000 cuts per minute. The planer has two feed rates: 16 and 30 FPM.
How many cutters are on the spiral cutterhead?
The cutterhead has:
4 rows of cutters
74 indexable carbide inserts (14 mm x 14 mm x 2 mm)
3 in. cutterhead diameter
What are the table specifications?
Table size: 20 in. long x 15 in. wide x 1-3/4 in. thick
Table movement range: 8 in.
Bed rollers: 2 adjustable rollers
Floor-to-table height: Adjustable 27 – 35 in.
Extension tables: 42 in. long x 15 in. wide x 1-3/4 in. thick (cast iron with rollers)
What construction materials are used?
Table and extension wings: Precision-ground cast iron
Body: Cast iron
Stand: Steel
Cutterhead assembly: Steel
Infeed roller: Serrated steel
Outfeed roller: Rubber-coated
Finish: Powder coated (green and putty)
What dust collection is required?
The planer includes a single 4 in. dust port. A dust collector is recommended for safe and efficient operation.
What safety and support features are included?
Magnetic switch with overload protection
Chip breaker and pressure bar
Board return rollers
Heavy-duty cast-iron handwheel for depth adjustment
Two-speed automatic feed
Four-column support with two positive table locks
Does the G0453Z have a mobile base?
Yes. It features a built-in, easy-to-use mobile base, so no separate purchase is required.
How long does it take to assemble?
Assembly and setup take approximately 30 minutes.
Where is the serial number located?
The serial number is located on the ID label on the upper cover.
What warranty does the G0453Z include?
The planer comes with a 1-year warranty, is manufactured in China, and is certified by a Nationally Recognized Testing Laboratory (NRTL).