What type of power does the G0815 Planer require?
The G0815 Planer operates on 240V, single-phase, 60 Hz power. It comes with a 6 ft., 12-gauge power cord and a 6-20 plug included, so it’s ready to connect to a standard 240V outlet. A 20A circuit is recommended for safe operation.
How powerful is the motor?
This planer is equipped with a 3 HP TEFC capacitor-start induction motor, running at 3450 RPM. The motor uses a triple V-belt drive system with shielded, permanently lubricated bearings for long-term durability.
What is the maximum cutting capacity?
Maximum cut width: 15"
Maximum stock thickness: 8-1/4"
Maximum depth of cut (full width): 1/8"
Maximum depth of cut (6" board): 3/16"
Minimum stock length: 6-3/8"
Minimum stock thickness: 1/4"
How fast does the cutterhead run?
The straight cutterhead spins at 5000 RPM, producing up to 15,000 cuts per minute. This planer also offers two feed rates (16 FPM and 30 FPM) for versatility depending on the finish you want.
How many knives are on the cutterhead?
The G0815 uses a 3-knife straight cutterhead. Each knife is 15" long, 1" wide, and 1/8" thick, made from HSS (High-Speed Steel). Knives are adjusted with jack screws for precise alignment.
Is there a spiral cutterhead upgrade available?
Yes. The G0815 can be upgraded with the T27899 Spiral Cutterhead, which uses 4-sided carbide inserts for smoother cuts, quieter operation, and reduced tear-out.
Can you install it before shipping?
No, we cannot modify components before shipment.
What are the table specifications?
The precision-ground cast-iron table measures 20-1/8" long x 15" wide x 3-1/2" thick. It is supported by a heavy-duty cast-iron body, ensuring excellent stability during planing.
What rollers does the planer use?
Infeed roller: Serrated steel
Outfeed roller: Rubber
This combination ensures positive feeding while reducing the chance of marring the finished surface.
What dust collection options are included?
The G0815 has a single 4" dust port, designed to be connected to a dust collection system for efficient chip removal.
What features make the G0815 stand out?
Straight cutterhead with 3 knives (upgradeable to spiral)
Triple V-belt drive for smooth power transfer
Gas spring-assisted head height adjustment
Headstock locks to prevent movement during planing
Chip breaker and pressure bar for smooth feeding
Two-speed automatic board feed (16 and 30 FPM)
Heavy-duty, precision-ground cast-iron construction
Pedestal-mounted magnetic switch with overload protection
Drive gears run in an oil bath for reduced wear
How loud is the G0815 Planer?
The planer operates at approximately 92 dB, so hearing protection is recommended during use.
How long does assembly take?
The G0815 requires about 30 minutes for assembly and setup. A knife-setting jig is included to simplify blade installation.
Where is the G0815 manufactured, and is it certified?
The G0815 is manufactured in Taiwan at an ISO 9001 certified factory. It is also certified by a Nationally Recognized Testing Laboratory (NRTL) for compliance with U.S. safety standards.
What is the warranty on the G0815 Planer?
This planer includes a 1-year warranty covering defects in materials and workmanship.