Important Disclaimer
This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
What voltage and electrical requirements does the ST1012 Planer have?
The ST1012 Planer requires 240V, single-phase, 60 Hz power. It comes prewired for 240V and includes a 6 ft., 12 AWG power cord with a 6-20 plug. The minimum circuit size recommended is 20A, and the machine features a magnetic switch with overload protection.
What are the motor specifications for the ST1012?
The planer is equipped with a 3 HP, single-phase, TEFC capacitor-start induction motor. It runs at 3450 RPM, draws 15 amps, and uses a triple V-belt drive for power transfer. The motor has sealed and permanently lubricated bearings, and the centrifugal switch is external.
What are the maximum cutting dimensions?
The ST1012 can handle a maximum cut width of 15 inches and a maximum cut height of 8 inches. The minimum stock length is 8 inches, and the minimum stock thickness is 3/16 inches. Maximum stock thickness is 8 inches.
How fast does the cutterhead operate, and what type is it?
The spiral cutterhead rotates at 4800 RPM and features 5 rows with a total of 75 German-made indexable carbide cutters. Each cutter measures 15 mm x 15 mm x 2.5 mm.
What are the feed rates and cutting depths?
The planer has planing feed rates of 16 and 30 FPM. The maximum cut depth for full-width planing is 3/32 inch, and for a 6-inch-wide board, it is 1/8 inch.
What are the table and roller specifications?
The table is precision-ground cast iron, measuring 20 inches long by 15 inches wide and 1-3/4 inches thick. It moves 8 inches with the headstock. The planer has two bed rollers, and the floor-to-table height is adjustable between 27 and 35 inches. Extension tables are 42 inches long by 15 inches wide and 1-3/4 inches thick. The infeed roller is serrated steel, and the outfeed roller is knurled.
What type of construction and materials does the ST1012 use?
The ST1012 features a cast-iron body, steel stand, and steel cutterhead assembly. It has a powder-coated finish for durability.
Does the ST1012 include dust collection features?
Yes, the planer has one 4-inch dust port to help manage chips and debris during operation.
What controls and measurement features are included?
The ST1012 includes a pedestal-mounted control switch, an inch and metric elevation scale, two-speed automatic board feed, and adjustable bed rollers. Table/headstock locks are provided for added stability.
What additional features make the ST1012 convenient to use?
The planer has a built-in mobile base, top-mounted board return rollers, precision-ground cast-iron extension wings, chip breaker and pressure bar, and four-column support with positive table locks.
What is the country of origin for the ST1012?
The ST1012 is made in China, and the machine is certified by a nationally recognized testing laboratory (NRTL).