Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
What is the maximum width of stock this planer can handle?
The Grizzly 13" Planer can handle stock up to 13 inches wide for planing and moulding.
What is the maximum and minimum thickness of material I can plane?
Maximum stock thickness: 6 inches
Minimum stock thickness: 1/8 inch
What is the minimum length of material I can plane?
The minimum recommended stock length is 8 inches to ensure safe operation and proper feeding through the cutterhead.
How many knives does the cutterhead have, and what type are they?
The planer features a 3-knife cutterhead with HSS (High-Speed Steel) knives that are reversible and indexed for easy, jig-free setup. Each knife measures 13" long, 1/2" wide, and 1/16" thick.
How fast does the cutterhead rotate, and what is the cutting rate?
Cutterhead speed: 9,000 RPM
Planing feed rate: 26 feet per minute
Cuts per minute: 27,000
This allows for smooth, consistent material removal with minimal tear-out.
What is the maximum cut depth for the planer?
Full-width 13" cut: up to 1/16 inch per pass
6" wide stock: up to 1/8 inch per pass
What kind of motor does this planer have?
The planer is powered by a 2 HP universal motor, single-phase, 120V, 60 Hz, with a full-load current of 15A. It uses a belt drive system and has sealed, permanently lubricated bearings.
What material is the table made of?
The table is stainless steel for durability and smooth feeding, while the body of the planer is made from powder-coated aluminum.
What type of feed rollers does this planer have?
Both infeed and outfeed rollers are rubber-coated to ensure consistent material feeding and prevent slipping.
Does this planer have dust collection?
Yes, it features a built-in dust collection system with a 2-1/2 inch dust port to help keep your workspace clean.
Are there any safety or locking features?
Table and headstock locks are included for stability during operation.
The toggle safety switch with removable key ensures the machine cannot be started accidentally.
Is this planer portable?
Yes. The planer includes convenient grab handles for easy mobility.
What are the dimensions of the table bed?
Length: 33-1/4 inches
Width: 13 inches
This gives ample support for wide boards and long stock pieces.
How long does assembly take?
Assembly and setup are quick, approximately 10 minutes, with the serial number located on the machine ID label.
How loud is this planer?
The machine operates at approximately 102 dB, so hearing protection is recommended during use.
Origin and Factory Details
Country of origin: China
Factory certification: ISO 9001, NRTL certified