What materials can I cut with the W1812 Planer/Moulder?
The W1812 is designed for cutting natural wood only. Using it on metal or other non-wood materials can:
Cause serious injury to the operator or bystanders
Damage the machine
Void the warranty
Can I use the planer without connecting it to a dust collector?
Technically yes, but it’s not recommended. Without dust collection:
Dust will accumulate quickly around the machine, requiring frequent cleanup
Fine dust can pose serious respiratory hazards
Overall cutting performance may suffer
For optimal safety and performance, connect the W1812 to a dust collection system that meets or exceeds the 4" dust port minimum CFM.
What is the motor size and power on the W1812?
Main motor: 2 HP, single-phase, 3450 RPM, TEFC capacitor-start induction
Feed roller motor: 1/8 HP, single-phase, DC universal, 0–55 RPM
The main motor drives the cutterhead via a belt, while the feed rollers are powered by a chain-driven DC motor.
How much wood can the W1812 cut at once?
Maximum cut width: 7"
Maximum cut height: 7-1/2"
Maximum cut depth (planing full width): 1/8"
Maximum profile depth (moulding): 3/4"
Maximum profile width: 6-3/4"
Feed speed and cuts per inch are adjustable between 64–300 cuts per inch, with the cutterhead spinning at 7,000 RPM.
What are the table dimensions and height?
Table bed: 14-1/8" L x 10" W x 7/16" thick
Table wings: 11" L x 8-9/16" W
Floor-to-table height: 30-3/8"
How many knives are included and what type are they?
Cutterhead type: Square
Number of knives: 2
Knife type: High-speed steel (HSS)
Knife dimensions: 7-1/8" L x 1-1/2" W x 1/4" thick
How fast do the feed rollers operate?
The feed rollers operate at 0–55 RPM, powered by a 1/8 HP DC motor, ensuring smooth and consistent stock feeding.
What safety features does the W1812 include?
Magnetic switch with thermal overload protection prevents motor damage
Precision-ground cast iron table and cast iron body ensure stability
Rubber-coated steel infeed and outfeed rollers provide safe and reliable stock control
What are the dust collection requirements?
The W1812 has a single 4" dust port. Connect to a dust collector that meets or exceeds the system’s recommended CFM to ensure safe operation and effective dust removal.
Where is the W1812 manufactured?
The machine is manufactured in Taiwan at an ISO 9001 certified factory.
How long does assembly take?
Assembly and setup typically take approximately 45 minutes.