Important Disclaimer
This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
General Questions
What is the warranty on the G0505?
The G0505 comes with a 1-year warranty from the date of purchase.
Where is the serial number located?
The serial number is on the ID label on top of the machine.
How long does it take to assemble?
Assembly and setup typically take about 15 minutes.
Where is the G0505 manufactured?
This planer is made in China.
Planer Specifications
What is the maximum cut width?
The maximum cut width is 12-1/2".
What is the maximum cut height?
The maximum cut height is 6".
What is the minimum stock thickness?
The minimum stock thickness is 13/64".
What is the maximum depth of cut?
Full-width cut: 1/16"
6-inch wide board: 3/32"
What type of feed rate does the planer have?
The planing feed rate is 32 FPM.
How many knives does the cutterhead have?
The cutterhead has 2 HSS reversible solid knives.
What is the cutterhead speed?
The cutterhead speed is 10,000 RPM.
How are the knives adjusted?
The knives are adjusted using spring tension.
Table & Rollers
What are the table dimensions?
Table bed: 11-1/2" long × 12-1/2" wide
Roller extension tables: 7-1/2" long × 14-1/2" wide
What type of rollers does it have?
Infeed roller: Rubber
Outfeed roller: Rubber
Does the planer include dust ports?
No, this model does not have dust ports.
Motor & Power
What type of motor does the G0505 use?
The planer uses a 2 HP universal motor, single-phase, 110V, with a speed of 19,000 RPM.
Is the planer belt-driven or direct drive?
The G0505 is belt-driven.
What is the full-load current rating?
The full-load current is 15A at 110V, and it requires a 20A minimum circuit.
Key Differences
What is the difference between the G0505 12-1/2" Portable Planer and the G0790 13" Benchtop Planer?
The G0790 is equipped with 1/8" thick knives. The G0505 comes with slightly thinner 1/16" knives, which is standard for portable planers. Note that the G0505 knife dimensions are 23/32" × 1/8".
Key Specifications
Planer Size: 12-1/2"
Cutterhead: 2 knives, HSS, reversible
Max Cut Width: 12-1/2"
Max Cut Height: 6"
Feed Rate: 32 FPM
Cutterhead Speed: 10,000 RPM
Table: Cast iron, precision-ground
Infeed/Outfeed Rollers: Rubber
Power: 2 HP, 110V, single-phase
Dust Ports: None
Assembly Time: 15 minutes
Warranty: 1 Year