Important Disclaimer
This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
General Questions
What is the warranty on the G0790 Planer?
This planer comes with a 1-year warranty from the date of purchase.
Where is the serial number located?
The serial number is located on the ID panel of the machine.
What is the sound rating of this planer?
The G0790 operates at approximately 95 dB.
Where is this planer manufactured?
The G0790 is manufactured in China.
Cutterhead & Knives
What type of cutterhead does the G0790 have?
The planer features a 2-knife HSS reversible cutterhead.
What size are the knives?
The knives are 12-1/2" long, 1/2" wide, and 1/8" thick.
How many cuts per inch does this planer make?
The G0790 makes 60 cuts per inch, at a feed rate of 26 FPM.
What is the maximum cut depth?
Maximum depth when planing the full width: 1/16"
Maximum depth on a 6-inch wide board: 1/8"
What is the cutterhead speed?
The cutterhead spins at 8,750 RPM.
What is the difference between the G0790 and G0505?
The G0790 comes with 1/8" thick knives, while the G0505 is equipped with 1/16" thick knives, which is standard for portable planers.
Electrical & Motor
What are the power requirements?
The planer requires 120V, single-phase, 60 Hz.
What is the motor type?
It is a 2 HP universal motor with brushes, running at 17,500 RPM.
What type of switch does it have?
The G0790 uses a paddle switch with a removable safety key.
Does it include a power cord?
Yes, the machine comes with a 6-foot, 14 AWG power cord with a 5-15 plug.
Table & Feed Rollers
What are the table dimensions?
Length: 12-3/4"
Width: 12-1/2"
Thickness: 3-5/8"
What type of feed rollers does it have?
Infeed roller: Rubber & Steel
Outfeed roller: Rubber & Steel
Is there an extension table?
Yes, the roller extension table is 6-1/4" long and 13" wide.
Dust Collection
Does this planer have a dust port?
Yes, it has a 2-3/8" dust port to connect to a dust collection system.
Construction & Build
What materials are used in construction?
Table: Stainless Steel
Body: Aluminum
Cutterhead Assembly: Steel
What type of finish does it have?
The body is powder-coated for durability.
Key Specifications
Planer Size: 12-1/2"
Maximum Stock Thickness: 4-1/2"
Minimum Stock Thickness: 5/16"
Planing Feed Rate: 26 FPM
Number of Cuts Per Minute: 17,500
Cutterhead Diameter: 2"
Number of Knives: 2, reversible HSS
Motor: 2 HP universal, 17,500 RPM
Power Requirements: 120V, Single-Phase, 60 Hz
Dust Port Size: 2-3/8"
Country of Origin: China
Approximate Assembly & Setup Time: 30–45 Minutes