Important Disclaimer
This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
What is the minimum length of stock I can process?
The minimum stock length for the G1037 is 14 inches.
What type of feed rollers does this planer/moulder have?
This machine features rubberized steel feed rollers, which provide consistent stock feeding and reduce slippage during planing or moulding operations.
Will my System Cutterhead knives work in this planer?
No. The System Cutterhead knives are designed for a different cutterhead system and will not fit the G1037.
How many knives does the cutterhead use?
The G1037 uses a three-knife system. Using fewer than three knives can cause the cutterhead to be unbalanced, which may damage the machine or reduce performance.
I have molding knives from a two-knife system other than Grizzly. Will they work?
No. The G1037 is specifically designed for a three-knife cutterhead, so two-knife sets are incompatible.
What size is the dust port?
The dust port on the G1037 is 4 inches in diameter.
What are the CFM requirements for a dust collector?
CFM requirements depend on several factors, including:
Distance from the dust collector to the machine
Moisture content of the wood
Depth and width of cut
As a guideline:
For distances of 10 feet or less, a 450 CFM dust collector may be sufficient.
Bigger is better when sizing a dust collector, as higher CFM improves chip and dust removal efficiency.
Where do I get the guide track used to guide the molding?
Grizzly does not supply a guide track, as molding guides vary widely depending on the profile being cut. Customers are encouraged to fabricate their own guides as described in the G1037 owner’s manual.
Key Specifications
Motor: 1-1/2 HP, single-phase, 110V/220V, 18A/9A
Cutterhead speed: 5,000 RPM
Max width of cut: 13"
Max stock height: 6"
Max planing depth: 1/8"
Max profile depth (moulding): 3/4"
Feed rate: Planing 24 FPM / Moulding 12 FPM
Table: Precision-ground cast iron
Feed rollers: Rubberized steel
Knives: 3
Dust port: 4"
Paint: Powder coated
Stand: Included