Important Disclaimer
This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.

What are the overall dimensions of the G3183?

The base measures 5-7/8" x 13-1/2", the fence is 19-1/16" x 13-3/4", overall height is 30-1/4", overall width is 13-3/4", and overall depth is 13-1/8".

What is the weight of the machine?

The shipping weight is 44.8 lbs, and the weight in place is 42.4 lbs.

What is the construction of the G3183?

The table is MDF, the column is precision-ground cast iron, and the base and head are cast iron.

What type of motor does it have?

It uses a ½ HP, single-phase, 60 Hz TEFC capacitor-start induction motor running at 3450 RPM.

What voltage and amperage does it require?

The motor operates on 110V, drawing 6 amps.

What kind of switch does the machine use?

It features a toggle ON/OFF switch with a removable key.

How is power transferred to the chisel?

The motor drives the chisel directly.

What type of bearings does it use?

The motor and components use shielded, permanently lubricated ball bearings.

What are the chuck and chisel capacities?

The chuck capacity is 3/8". Chisels up to 5/8" or ¾" shank diameter are supported using the included bushings.

How much head travel does the machine have?

The head has 4¾" of vertical travel.

How deep can the chisels cut?

1/4", 5/16", and 3/8" chisels cut up to 2" deep. 1/2" and 5/8" chisels cut up to 3" deep.

How thick of material can I use with the G3183?

The machine can handle material up to 4" thick.

Will other brand chisels fit this machine?

Yes. It comes with bushings to accommodate 5/8" and 3/4" diameter chisels from other brands.

I’m having trouble mounting the chisel. The drill seems too long for the housing. What’s wrong?

Drills may be too long due to differences in chuck sizes. The shank may need to be shortened to fit properly in the housing.