Important Disclaimer
This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
Can I run moulding knives in my G1021 Planer?
No. There isn't enough clearance around the cutterhead, nor is there enough adjustment in the infeed roller to accommodate moulding knives.
What type of oil should I use in the gearbox?
Use 90-weight gear oil. In unheated winter workshops, switch to 50-weight motor oil, and change back to 90-weight in the summer.
What type of feed rollers does it have?
- Infeed roller: Solid steel with spiral serrations
- Outfeed roller: Solid smooth steel roller
Is there a larger motor available for the G1021?
Yes. The following replacement motors are available:
- G5013 – 3 HP motor
- G5015 – 5 HP motor
Since this is a 220V machine, what size breaker do I need?
You’ll need a 20A circuit breaker to operate this planer.
What are the CFM requirements for a dust collector?
This can vary depending on factors like distance to the dust collector, moisture content in the wood, and depth of cut. For setups within 10 feet, a dust collector with at least 450 CFM may suffice. However, when sizing a dust collector, bigger is better.
Do I have to use a dust collector?
No, the machine will operate without a dust collector. However, the dust hood adapter should still be installed, even if a dust collector is not in use.
Can I hook this machine up to a generator?
Yes, but only with larger generators. A minimum of 7.5 kW is recommended.
Does the machine include a knife setting gauge?
Yes, a basic knife setting gauge is included.
We also offer:
- G7155 – a more accurate knife setting gauge
- G1738 Rotocator – allows measurement of knife tolerances within .001" and helps set and maintain machine components precisely.