Important Disclaimer
This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
What is the difference between the G0799, G0800, and G0835?
G0835: 3 HP motor, 24" swing over bed, 24" distance between centers, smaller footprint, designed for bowl turning.
G0799: 2 HP motor, 20" swing over bed, 48" distance between centers, swing-away bed.
G0800: 3 HP motor, 24" swing over bed, 48" distance between centers, swing-away bed, extra 4" swing over bed.
What motor does the G0835 use?
The lathe is equipped with a 3 HP, 3-phase TEFC induction motor running at 1720 RPM with belt drive and sealed, permanently lubricated bearings.
Does the lathe have variable speed?
Yes. It features an electronic variable-speed spindle control with digital RPM readout:
Low speed range: 60–1200 RPM
High speed range: 120–2300 RPM
Does the headstock swivel?
No, the headstock is fixed, but it can be positioned anywhere along the bed for flexibility.
What is the maximum swing capacity?
Swing over bed: 24"
Swing over tool rest base: 20"
What is the maximum distance between centers?
24"
What are the spindle specifications?
Taper: MT#2
Thread: 1-1/4" x 8 TPI, right-hand
Bore: 0.625"
Indexed increments: 7.5°, 48 positions
Outboard spindle: 1-1/4" x 8 TPI, right-hand
What tool rest does it include?
Width: 14-1/4"
Post diameter: 1"
Post length: 5-5/16"
Base height: 2-5/16"
Lever-action cam locks for fast adjustments
What accessories come with the G0835?
Chuck guard
Chisel tray
3-1/4" faceplate
Tool holder
Live center & live center pin
Spur center
Index pin
Knockout rod
50mm open-end wrench
Hex wrenches: 3mm and 10mm
Can I install a drill chuck in the tailstock?
Yes. The tailstock has an MT#2 taper, compatible with any drill chuck using an MT#2 to Jacobs® taper arbor.
Does the lathe have a forward/reverse function?
Yes, a forward/reverse switch is included.
What electrical setup is required?
Voltage: 220V, single-phase, 60 Hz
Full-load current: 15.8A
Minimum circuit: 20A
Comes prewired with a 6 ft., 14 AWG power cord and 6-20 plug
What are the construction materials?
The G0835 is built for durability with a cast-iron bed, frame, stand, headstock, and tailstock.
What is the floor-to-centerline height?
46" from the floor. Adjustable leveling feet are included.