Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
What is the difference between the G0799, G0800, and G0835?
Although similar in appearance, the G0800, G0799, and G0835 have distinct design differences:
G0800: 3 HP motor, 24" swing over bed, 48" distance between centers, swing-away bed for outboard turning.
G0799: 2 HP motor, 20" swing over bed, 48" distance between centers, swing-away bed.
G0835: 3 HP motor, 24" swing over bed, 24" distance between centers, smaller footprint, designed for bowl turning.
What motor does the G0800 use?
The lathe has a 3 HP, 3-phase TEFC induction motor running at 1720 RPM, with a belt drive and shielded, permanently lubricated bearings for long-lasting performance.
Does the lathe have variable speed?
Yes. It uses an electronic variable-speed spindle control (Delta VFD) with a digital RPM readout. Speed ranges:
Low: 60–1000 RPM
High: 200–3500 RPM
Does the headstock swivel?
No, the headstock is fixed, but it can be positioned anywhere along the bed for flexible setups.
What is the maximum swing capacity?
Swing over bed: 24"
Swing over tool rest base: 20"
Swing-away bed section: 12" for easy tailstock storage
What is the maximum distance between centers?
48"
What are the spindle specifications?
Taper: MT#2
Thread: 1-1/4" x 8 TPI, right-hand
Bore: 0.625"
Indexed increments: 7-1/2°, 48 positions
Outboard spindle: 1-1/4" x 8 TPI, right-hand
What tool rest does it include?
Width: 14-1/4"
Post diameter: 1"
Post length: 5-5/16"
Base height: 2-5/16"
Lever-action cam locks for fast adjustments
What accessories come with the G0800?
Chuck guard
Chisel tray
3-1/4" faceplate
Tool holder
Live center & pin
Spur center
Index pin
Knockout rod
50mm open-end wrench
10mm & 3mm hex wrenches
Can I install a drill chuck in the tailstock?
Yes. The tailstock has an MT#2 taper. Any compatible drill chuck with an MT#2 to Jacobs® taper arbor can be used.
Does the lathe have a forward/reverse function?
Yes, a forward/reverse switch is included.
What electrical setup is required?
Voltage: 220V, single-phase, 60 Hz
Full-load current: 15A
Minimum circuit: 15A
Comes with a 6 ft., 14 AWG power cord and a 6-15 plug
What are the construction materials?
The G0800 is built for heavy-duty use with a cast-iron bed, frame, stand, base, headstock, and tailstock.
What is the floor-to-centerline height?
46" from the floor. Adjustable leveling feet are included.