The G0838 lathe features a 2 HP, 3-phase TEFC induction motor with a Delta VFD-M inverter for variable spindle speed and single-phase power compatibility. It requires 220V single-phase power, offers a 16-inch swing over bed, 24-inch distance between centers, and spindle speeds from 100 to 2900 RPM. Constructed with cast iron, it includes essential accessories, is ISO 9001 certified, and comes with a 1-year warranty.
What type of motor does the G0838 lathe use?
Does the G0838 lathe include a Variable Frequency Drive (VFD)?
Yes. The G0838 is equipped with a Delta VFD-M inverter (2 HP), which provides variable spindle speed control and smooth motor operation.
The VFD allows the machine to operate on single-phase input power, even though the motor itself is three-phase—making it compatible with common shop electrical setups.
What are the electrical requirements for the G0838 lathe?
The G0838 requires 220V, single-phase, 60 Hz power.
- Full-load current: 12A
- Recommended minimum circuit size: 15A
- Power cord: 6 ft, 14 AWG
- Plug type: NEMA 6-15 (plug-and-play for standard 220–240V outlets)
Because the machine uses a VFD, it is designed to accommodate typical voltage variation. As long as your supply voltage falls within the acceptable range (generally 198V–242V, depending on nominal voltage), the lathe will operate safely and reliably on 208V, 220V, or 240V power.
✅ Important: For VFD-equipped machines like the G0838, the input power requirements—not the motor nameplate—determine compatibility. Always verify your incoming power meets the machine’s specified input rating.
What is the swing capacity and distance between centers?
- Swing over bed: 16 inches
- Swing over tool rest base: 11-1/2 inches
- Distance between centers: 24 inches
- Max tool rest to spindle center: 8-1/8 inches
This makes the G0838 ideal for medium to large turning projects.
What is the spindle speed range?
The G0838 lathe offers variable spindle speeds:
- Low range: 100–1300 RPM
- High range: 150–2900 RPM
It also includes a digital spindle speed indicator for precise control.
What spindle specifications should I know?
- Spindle taper: MT#2
- Spindle thread: 1" x 8 TPI, right-hand
- Spindle bore: 3/8 inch
- Indexing increments: 10°, 30° with 12 total indexes
- Outboard spindle: M18 x 1.5 TPI, right-hand
What accessories are included with the G0838 lathe?
The lathe comes with:
- 6" faceplate
- Live center
- Spur center
- Tool holder
- Indexing pin
- Knock-out tool
What is the construction quality of the G0838 lathe?
The G0838 is built with cast iron components throughout, including the bed, frame, stand, headstock, and tailstock, ensuring stability and vibration reduction. It features a durable enamel finish.
What are the tailstock and tool rest specs?
- Tailstock taper: MT#2
- Included tailstock center: Live
- Tool rest width: 12 inches
- Tool rest post diameter: 1 inch
- Tool rest post length: 2-1/8 inches
- Tool rest base height: 2-1/4 inches
Is the G0838 lathe ISO certified?
Yes, it is manufactured in an ISO 9001 certified factory in China.
What is the warranty and support information?
The G0838 lathe includes a 1-year warranty. The serial number can be found on the ID label for registration and support purposes.