What are the power requirements for the G0694 lathe?
The G0694 requires 220V, single-phase, 60 Hz power. It is prewired for 220V, has a full-load current rating of 19.6 amps, and should be connected to a 20-amp circuit.
Does the G0694 include a power cord and plug?
Yes, it includes a 6 ft. 14 AWG power cord. A plug is not included. The recommended plug type is a NEMA 6-20.
What type of switch and inverter does it use?
The machine uses a push-button ON/OFF switch and a Delta VFD-E inverter rated at 3 HP.
What type of motor does the G0694 have?
It has a 3 HP, 3-phase, TEFC induction motor powered by the inverter. The motor operates at 50–1725 RPM, draws 9 amps, and has sealed, permanently lubricated bearings.
What is the swing capacity and distance between centers?
Swing over bed: 20 in.
Swing over tool rest base: 16-1/4 in.
Swing over gap: 24-7/8 in.
Distance between centers: 43 in.
Maximum tool rest to spindle center distance: 8 in.
What spindle speeds are available?
The G0694 has a variable-speed spindle with a range of 100–3000 RPM, controlled by the inverter and a 3-step pulley system.
What is the spindle size and taper?
Spindle taper: MT#2
Spindle thread size: 1-1/4" x 8 TPI right-hand thread
Included spindle center: Spur center
Outboard spindle: 1-1/4" x 8 TPI right-hand thread
Does the lathe support outboard turning?
Yes. The G0694 includes a 13-3/4 in. wide outboard tool rest and an outboard spindle for large-diameter work.
What tool rest and centers are included?
The machine includes:
13-13/16 in. tool rest with a 1-1/4 in. diameter post
MT#2 spur center (spindle)
MT#2 live center (tailstock)
Does the spindle have indexing capability?
Yes. The spindle can be indexed every 15 degrees for precision operations.
What construction materials are used?
Bed and headstock/tailstock: Cast iron
Stand: Pre-formed steel
Finish: Enamel coating
What special features does the G0694 include?
Single-phase inverter powering a 3-phase variable-speed motor
Reversible motor control
Quick-release belt tension lever for fast speed changes
Heavy cast-iron bed for stability and reduced vibration