What are the power requirements for the G0462 lathe?
The G0462 requires 110V, single-phase, 60 Hz power. It is prewired for 110V, has a full-load current rating of 14 amps, and should be connected to a 20-amp circuit. The machine includes an 8 ft. 16 AWG power cord with a NEMA 5-15 plug, so it works with a standard household outlet.
What type of motor does the G0462 have?
The lathe is powered by a 2 HP, single-phase, permanent split capacitor motor running at 1725 RPM. It uses a V-belt drive system, and the motor bearings are shielded and permanently lubricated for long service life.
What is the swing capacity and distance between centers?
Swing over bed: 16 in.
Swing over tool rest base: 12 in.
Distance between centers: 46 in.
Maximum distance from tool rest to spindle center: 13 in.
Does the G0462 have variable spindle speeds?
Yes. The lathe offers variable spindle speeds ranging from 600 – 2400 RPM.
Does the headstock rotate?
Yes. The headstock can be rotated and locked into multiple positions: 0°, 60°, 90°, 120°, and 180°.
What is the spindle size and taper?
The spindle features an MT#2 taper, a 1" x 8 TPI right-hand thread, and a 3/8 in. bore. A spur center is included.
What tool rest and centers are included?
Tool rest: 11-3/4 in. wide, with a 1 in. diameter post
Tailstock center: MT#2 live center
Spindle center: Spur center
What materials are used in the construction?
The G0462 is built with heavy-duty cast iron components for strength and stability:
Bed, frame, stand, base, headstock, and tailstock: Cast iron
Finish: Durable enamel coating
How heavy is the G0462, and how long does it take to assemble?
The lathe weighs approximately 354 lbs. (shipped weight) and takes about 1 hour to assemble and set up.
What special features does the G0462 have?
Spindle tachometer with digital readout
Quick lock/release levers for both the tailstock and headstock
Heavy-duty cast-iron bed and legs for vibration reduction and stability
Where is the serial number located?
The serial number can be found on the machine ID label.
Are there any certifications, and what warranty does the G0462 include?
The lathe is manufactured in an ISO 9001 factory, comes with a 1-year warranty, and is not certified by a Nationally Recognized Testing Laboratory (NRTL).