FAQ: G0624Z 10" x 16" Benchtop Wood Lathe (Discontinued) – Support Home

Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.

1. What type of power does the G0624Z Lathe require?

The G0624Z runs on 120V, single-phase, 60 Hz power. It includes a 6 ft., 18 AWG power cord and plug, and a 15A circuit is recommended for safe operation.

2. How powerful is the motor?

This lathe is equipped with a 0.7 HP TEFC induction motor, running at 1725 RPM and drawing 8 amps. Power is transferred through a belt drive system with shielded, permanently lubricated bearings for long-lasting performance.

3. What is the swing capacity and distance between centers?

Swing over bed: 10"
Swing over tool rest base: 7-1/2"
Distance between centers: 15"
Max. distance from tool rest to spindle center: 3-3/4"

These specs make the G0624Z ideal for small to mid-sized turning projects.

4. How many spindle speeds are available?

The G0624Z offers 6 spindle speeds, ranging from 480 to 4023 RPM, allowing you to adjust speed based on workpiece size and turning type.

5. What type of spindle does the lathe have?

Spindle taper: MT#2
Spindle thread size: 1" x 8 TPI (right hand)
Spindle bore: 23/64"
Included spindle center: Spur center

This makes it compatible with a wide range of aftermarket accessories.

6. What comes included with the tailstock?

The tailstock uses an MT#2 taper and includes a live rolling center.

7. What tool rest is included with the G0624Z?

Width: 6-5/16"
Post diameter: 5/8"
Post length: 2-9/16"
Base height: 1-3/8"

This provides solid support for most woodturning chisels.

8. What is the construction of the lathe?

The bed, headstock, and tailstock are made from precision-ground cast iron for rigidity and reduced vibration. The finish is a durable enamel paint coating.

9. What is the floor-to-center height?

The spindle center is 13-3/16" from the floor, making the lathe comfortable to use on most workbenches.

10. What accessories are included with the G0624Z Lathe?

3" faceplate
Live rolling center
Spur center
Tool rest

Everything you need to start turning right away.

11. Where is the G0624Z manufactured?

This model is manufactured in China at an ISO 9001-certified factory.

12. What is the warranty on the G0624Z?

The lathe comes with a 1-year warranty covering defects in materials and workmanship.

13. What is the difference between G0624Z and H8259?

G0624Z: 0.7 HP motor, 15" between centers, 91 lbs., 6 speeds (480–4023 RPM)
H8259: 0.5 HP motor, 18" between centers, 73 lbs., 5 speeds (826–3337 RPM)

The G0624Z offers more power, a wider speed range, and heavier construction for improved stability.