What are the electrical requirements for the G0844 lathe?
The G0844 lathe operates on 120V, single-phase, 60 Hz power. It draws 9.5 amps at full load and requires a 15A circuit. It includes a 6-foot, 16 AWG power cord with a NEMA 5-15 plug, making it compatible with standard outlets.
What type of motor does the G0844 use?
This lathe features a 3/4 HP DC motor running at 1900 RPM. It uses a belt drive system for power transfer and includes shielded, permanently lubricated bearings for smooth and reliable operation.
What is the swing capacity and distance between centers?
- Swing over bed: 14 inches
- Swing over tool rest base: 10 inches
- Distance between centers: 20 inches
- Max tool rest to spindle center: 7-1/4 inches
This makes the G0844 suitable for a wide range of turning projects, from pens to bowls.
What is the spindle speed range?
The G0844 offers variable spindle speeds across three ranges:
- Low: 250–720 RPM
- Medium: 600–1700 RPM
- High: 1200–3550 RPM
A digital spindle-speed readout provides precise control and visibility.
What are the spindle specifications?
- Spindle taper: MT#2
- Spindle thread: 1" x 8 TPI, right-hand
- Spindle bore: 0.40 inch
- Included spindle center: Spur center
- Indexing increments: 15°
- Number of indexes: 24
- Outboard spindle: M20 x 1.5, right-hand
What are the tailstock and tool rest specs?
- Tailstock taper: MT#2
- Included tailstock center: Live center
- Tool rest width: 8 inches
- Tool rest post diameter: 1 inch
- Tool rest post length: 1-3/4 inches
- Tool rest base height: 2 inches
What is the construction quality of the G0844?
The G0844 is built with solid cast iron components for the bed, base, headstock, and tailstock, ensuring stability and reduced vibration. It features a durable enamel finish.
What accessories are included with the G0844 lathe?
The G0844 includes:
- 4" faceplate
- Spur center
- Live center
- Knockout bar
- Spindle wrench
- Hex wrenches (3, 4, 5, and 12mm)
What features make the G0844 stand out?
- Three spindle-speed ranges for versatile turning
- Digital spindle-speed readout
- Forward/reverse switch
- Quick-release adjustments for rest and tailstock
- Built-in tool holder
- Convenient carrying handles
- Adjustable rubber feet
- Easy-access door for belt changes
- 15° spindle indexing with 24 positions
How does the G0844 compare to the G0842 lathe?
- G0844: 14" swing over bed, 20" distance between centers, weighs 110 lbs
- G0842: 12" swing over bed, 37" distance between centers, weighs 155 lbs
Both are variable-speed benchtop wood lathes, but the G0842 offers extended turning capacity for longer workpieces.
What is the warranty and certification status?
- Warranty: 1 year
- Country of origin: China
- ISO 9001 factory: Yes
- NRTL certified: Yes
How long does assembly take?
The approximate assembly and setup time is 15 minutes.
Where is the serial number located?
The serial number is located on the ID label affixed to the lathe.