What are the electrical requirements for the T25926 lathe?
The T25926 lathe operates on 110V, single-phase, 60 Hz power. It comes prewired for 110V and draws 3.4 amps at full load. A 15A circuit is recommended. It includes a 6-foot, 18 AWG power cord with a NEMA 5-15 plug, making it compatible with standard household outlets.
What type of motor does the T25926 use?
This lathe features a 370W (1/2 HP) universal brush-type motor running at 1700 RPM. It includes shielded, permanently lubricated bearings for smooth operation and reduced maintenance.
What is the swing capacity and distance between centers?
- Swing over bed: 10 inches
- Swing over tool rest base: 7-1/4 inches
- Distance between centers: 18 inches
- Max tool rest to spindle center: 4-3/4 inches
This makes the T25926 ideal for small to medium turning projects.
What is the spindle speed range?
The T25926 offers variable spindle speeds from 650 to 3800 RPM, allowing users to fine-tune speed for different materials and turning techniques. A digital readout display provides real-time spindle speed information.
What are the spindle specifications?
- Spindle taper: MT#2
- Spindle thread: 1" x 8 TPI, right-hand
- Spindle bore: 3/8 inch
- Included spindle center: Spur center
What are the tailstock and tool rest specs?
- Tailstock taper: MT#2
- Included tailstock center: Live center
- Tool rest width: 5-3/4 inches
- Tool rest post diameter: 5/8 inch
- Tool rest post length: 2-3/8 inches
- Tool rest base height: 1-3/8 inches
What is the construction quality of the T25926?
The lathe is built with cast iron components throughout the bed, frame, base, headstock, and tailstock, providing excellent vibration resistance. It features a urethane finish for added durability.
What accessories are included with the T25926 lathe?
The T25926 includes:
- 3-1/8" faceplate
- Spur center
- Live center
What features make the T25926 stand out?
- Digital spindle speed readout
- Variable-speed spindle control (650–3800 RPM)
- Compact footprint with cast-iron stability
- Toggle switch with disabling key for safety
- Compatible with T27327 22" bed extension for increased turning capacity
How does the T25926 compare to the T25920?
- T25926: 10" swing over bed
- T25920: 12" swing over bed
Both models are compatible with the T27327 22" bed extension, allowing users to expand their turning capacity.
Where is the serial number located?
The serial number is located on the ID label affixed to the lathe.
Is the T25926 lathe ISO certified?
Yes, it is manufactured in an ISO 9001 certified factory in China.
What is the warranty?
The T25926 lathe comes with a 1-year warranty.